They sell links to replace the factory ones that will lift that truck and keep the air suspension. They are not expensive at all. Usually about $100 for a pair. Take about 5 mins to install.
...
Type: Posts; User: okskeetertzx190
They sell links to replace the factory ones that will lift that truck and keep the air suspension. They are not expensive at all. Usually about $100 for a pair. Take about 5 mins to install.
...
You might be able to find someone that has a Yamaha that would prefer a Mercury. I have met plenty of people that bought boats because they were the best deal they could find and settled for the...
Was there about 2 weeks ago. Fished about 4 hrs. Had a 6lber and two 2.5lbers. I’m sure things have improved in the last 2 weeks though.
I have used u-ship more than once. One time from Tennessee to Oklahoma and the other from Georgia to Oklahoma. I reviewed the shippers profile feedback from other shipments to see if they had...
Mine started doing that the other day. I greased and it was still doing it. So I cleaned it really well and it started working. I think maybe mine was just dirt and a layer of grease.
I have a ZXR boat but I mounted the black box in the front of the starboard rod locker on the wall that is shared with the center tackle storage. I chose this location to avoid purchasing any...
I have had ZX boats and now a ZXR 20. My ZXR does start chine walking at about 72-73. You are right about ZX boats not chine walking. You say that you have a hydraulic jack plate. The higher my...
I did consider doing something like this but every time I was checking voltage on the manual wire directly after I tested the auto wire the voltage was good. That is what made me think I was getting...
I did find that the fuse that seemingly only goes to the pump auto wire seemed to be not very tight fitting in the holder. I have replaced the fuse holder with a new one and during my testing in the...
Exactly.
I ran a pair of 8 gauge and a pair of 10 gauge on my ZXR up the starboard side. I connected them to the large perko style switch at the rear of the boat. I turn that switch off before I plug the...
The credit limit makes a difference when you make a purchase with the card. You do not want any balances that are utilizing a large amount of the credit limit. So if your Lowes card has a $1000...
I have used u-ship for two boats over the years. My experience was always good with them.
I don’t think so. If anything all 3 wires are too short making it difficult to work on.
I have not noticed any additional wires just the 3 I am connecting the pump to.
When I cannot get the pump to run in auto I unplug the connections and test at 5-7 volts. When I can get the proper 12 volts on the “ auto supply wire” the pump does run in auto. I am testing with...
I have a 2021 Skeeter ZXR 20. The other day my remote drain plug wasn’t seated all the way so I was slowly taking on water. The auto part of the bilge pump didn’t come on so I pushed the manual...
If the rpm’s are where you like them now you might try a 23 Scorpion. If the rpm’s are lower than you like now you might try a 22 Scorpion. If you did not want to purchase a prop you could always...
I have ran a few props on SHOs and for me the Scorpion props have had the most bow lift. They do run about 1-2 pitches stiff though. What prop are you running now?
I used Vantage Recreational Finance. They had the best rate for the ridiculously long term I was using to finance my boat and were really easy to work with. There are also some sponsors on here...
I thought I saw somewhere that they were the same as guitar jacks but I might be wrong.
https://drewcraft.com/coolfoot/
I replaced my Garmin gimbal with the gray BBT gimbal because the unit seemed to have a quite of bit of bouncing around with the factory gimbal. My other unit is a Helix 12. This unit doesn’t seem to...
I got mine at autozone a few months ago. I’m sure other parts stores should have them too. NGK3672 is another name for them I believe.
Same thing happened to me. I don’t remember exactly what position I had the bracket in to get it out but I was able to get it almost perfect with a hammer on the garage floor. I put it back in and...