I start with about 13'. Typical setup is 30# 8-strand braid FG knot to 8#-15# Seaguar Red or Daiwa J-Fluoro (lovin' the Daiwa stuff). I never notice the knot with moving baits. I'll get an...
Type: Posts; User: bassboat1
I start with about 13'. Typical setup is 30# 8-strand braid FG knot to 8#-15# Seaguar Red or Daiwa J-Fluoro (lovin' the Daiwa stuff). I never notice the knot with moving baits. I'll get an...
I've had less than ideal results with AZEK's 1/2" trim the few times I've used it. IDK if I have installed the Trex fascia/bandboard yet (used it for risers). Most of my decks get cellular PVC band...
548183
Nice! This year's been lots of looking, to find a few scaly acorns! Success has been split between a jerkbait and a compact double-colorado spinnerbait for me. Haven't seen 50 yet. Crappie fishing...
I do a fair amount of Trex, and some AZEK/TimberTech (and have installed a double handful of others over the years).
Trex is a composite (plastic + wood fiber) plank, and has three levels/price...
Good job with the rehab. :beers:
Let me tell you about fast...
I use a few of their baits on jigheads, and superglue them every time ($.50/ea 24-packs, 'cause the open tubes die fast). I have had no issues storing them in their original bags, in a 3700 alongside...
I didn't put it in perspective, and I always keep it in forward.
Yeah, I was messing around in the menus, trying to clear things up and apparently dropped the ball:ohwell:
If you've got that much grass, consider upping your line size. I fish Chatterbaits on braid w/15# leader on a stiff rod - it busts off grass pretty well, and I don't lose them.
Avoiding air bubbles is ideal, so I've relied on a supply of the Lowrance transducer epoxy that you mix in the envelope - without whipping in air. I believe Vexilar sells a similar kit (with scuff...
The last time I did boat carpet, I ordered Dap 00442 Weldwood online
Running 3/93SV UHD on a network switch, with one dedicated to LiveScope. The beam illustration on the bow unit running mapping has disappeared - is this because I turned off AHRS on LS?
Edit: yep,...
One of my 93SVZ will show a similar effect at times. It's somewhat visible in the lower area of this camera pic of the screen
547596
Ever notice that the shiny shoes she's wearing (that you've never seen) were "in the back of the closet the whole time" - every dang time you go and do something like that? :smile:
Those look tasty!
547592
I keep a Schumacher 2/8/50 boost "dumb" charger on hand, as the smart chargers won't begin charging a completely dead battery. I use a NOCO Genius and a Battery Tender Jr for the smaller SLA and...
An Original Rapala F11G (gold) is killer in the prespawn (~50-65 water temps) mornings in our clear water. I usually target silted/dark-bottom inlet areas that have some of the slowest slopes in the...
An Original Rapala F11G (gold) is killer in the prespawn (~50-65 water temps) mornings in our clear water. I usually target silted/dark-bottom inlet areas that have some of the slowest slopes in the...
547386
I use the entire Rapala lineup - the Mavrik in Ghost Minnow has been getting it done this spring in 40-45 degree water temps. I reserve the XRap for warm water smallmouth.
For medium runners (8'-12'), RkCrawler 55 in Phantom Watermelon, 3XD in Chart/Perch, DT10 in Delta or Helsinki Shad is growing on me
Probably a sheet metal shop near you. It would have to be punched, then bent.
Potential for 18" of snow by then end of Thursday. Guess I'll hitch the boat to the plow truck and be ready for anything!
How about this flag war between neighbors?
546933
