No it looks okay
Type: Posts; User: ggmurray191
No it looks okay
B,
I just happen to notice something!! Looking at the head pic and #3 cylinder certain it was old damage then I noticed that the head gasket was still on the head and looks like it has damage….I...
Mr. B pretty 80 psi across the cylinders if #3 is running damaged wouldn’t the compression be super low.
Temp readings are from the side plate and each cylinder
Everyone on my temp reading of the cylinders, I guess are worthless! I should have looked at the manual first as I should have been taking temp reading behind the thermostat on the block which should...
B, check carbs all had fuel no problem
Mr. B pics for u.
Mr. B sorry decarb not carbs….well no I’ve had the head off and really not much buildup of anything even scale so I cleaned up the surfaces and installed a new head gasket and put everything back...
Mr. B yes just got thru with carbs. All disassemble and inspected cleaned and new OEM Evinrude kit back in. Done a bunch to the 70 horse, pulled the side plate relocated the tell tale and pulled the...
Bought a used Evinrude E70 4 stroke 300 hrs. Was going to swap but only if the 2 stroke can’t be fixed.. I know you guys can head me in the right direction!!
Paw-in-law’s ole Malibu me and him fished on until he passed with COVID. I want to get the Evinrude top notch I’m keeping the Malibu! :thumb up2:
This smoke and oil is what I’m dealing with. Anyone with an idea please let me know. I think compression is so low it’s not burning the fuel properly and it’s just blowing by. Starts and runs but...
C, I used a brand new Winters gauge oil filled and better range for my compression info.
Championman and others!
Today I was able to take the temp reading that C was curious about so I got the startup temp and monitored every 5 mins for 30mins. Then I pulled the plugs and took the...
Pic of the oil droplets in the water. The oil was really bad that’s when I discovered #1 cylinder wasn’t firing. It’s somewhat better now.
Thanks for the tips C, I will swap the 0-300 gauge out with another that has a closer range so I can get a more accurate reading. The 90-105 numbers I mentioned were just what I had read on the net....
Hey Everyone,
working on the 70 hp Evinrude model E70TLCEM. I can go into all the details and probably will but for now I was hoping for some advice on my compression results. Yesterday a...
Thanks for the input Bighare2 ordering up now! Maybe the guys at Evinrude customer service will be able to decode the freeze plug! Gonna give them a call and see what they say!
Update guys,
called crowley and talked to the tech guy about the oils and filter and he verified that was the right stuff! XPS 5W40 SYN (PN 0779434) gearcase oil (PN 0778755) Oil filter (PN...
Morning everyone!
Working on my project Evinrude trying to get the engine and gearcase oils sorted out. First things first though! my 70 hp is missing the data plate with all the model and...
Well everyone we can close this one out! Optimax did just fine! It’s case closed! Thanks again guys for all your help and guidance! BBC is outstanding! Proud to be a member!
FYI: More to come on the Optimax, lake/river run this weekend!
Guys 1999/2000 not 89. Really a mystery as the data plate is missing. I did however find the numbers on the freeze plug, but haven’t had much luck with them. I was hoping the SDS software might be...
Yikes! Sorry!
Well the piece that was stuck in the valve is missing in action so I won’t be able to say steel or aluminum. Their taking the triton out Friday for a run I’ll report in on how things went. We wanted...