Motor has 160 hours. I just replaced the plugs. I am picking up the filter this weekend to change. The belt and impeller were replaced when it broke last summer. Had it out yesterday and ran better...
Type: Posts; User: randyc16623
Motor has 160 hours. I just replaced the plugs. I am picking up the filter this weekend to change. The belt and impeller were replaced when it broke last summer. Had it out yesterday and ran better...
Serial number: 2B770913
2020 250 ProXS
So was on the water Friday and it was in the high 80’s. When I would go up on plane boat came out of the hole fine. As soon as it planned off it would...
Does anyone know the minimum voltage required for Garmin 93 SV UHD to operate properly??
So yesterday I put my other prop on and seems to have solved the problem. Apparently I must have a partially spun hub if that is possible.
I am going to put the old prop back on and see if the...
Sorry I forgot to tell you the why. Came apart and destroyed belt.
Don’t recall the part number but it was direct from mercury. They changed the flywheel from my original one. The original one had a rubber ring inside the flywheel. Replacement does not.
Spoke with...
so I recently replaced the flywheel on my 250 pro xs 4 stroke (ser. #2B770913) and now when boat planes off it is surging. Tachometer is fluctuating 100/200 rpm. As soon as I trim up motor it seems...
There was shredding everywhere. Never really found a large piece of belt. Intake has a mesh cover so only small pieces could get in there. Would that hurt anything?
So today my alternator belt shredded. I had been hearing a ticking sound last couple times I was out. I pulled the cowling but was unable to locate problem. The pulley was pulled lose from the...
Anyone know what drop hitch I need for 2021 Chevrolet Trail Boss. Pulling 721 phoenix.
Anyone know what drop hitch I need for a 2021 Chevrolet Trail Boss?? Towing a 721 Phoenix??
My be a rod tube scuffing your line
Anyone know how high the top of motor is on 721 on the trailer. Trying to see if it will fit in garage. 250 mercury. Four stroke
Every where I go
Have 93 echo map sv. Mapping seems to be off about ten feet according to depth on depth finder with new g3 card. Anyone have any idea why?
Thanks earthworm
Appears it is the friction ring. Tour reel apart and it was deteriorated. Broke in half and tacky. Took it out and reel seem to work fine. Guess I need new friction ring. Thanks for the info.
I was told there was a fix for it. Maybe a washer or something.
Does anyone know how to stop shimano spinning reels from getting a tight spot when reeling after they get wet???
Yes. Remote seems ok
Anyone else ever have water in their oil tank. Have a z119 with 225 exec. Not sure how it got in there??
Anyone know how the Phoenix 721 performs with mercury 250 4 stroke.
Anyone running a fury 26 on ranger z119. Currently running a 25 fury on a 2013 exec 225ho. Wondering what the 26 would do.
So I put the nut on and seems to have solved the problem for now. However spoke with Mark at Marks Props and he said that the spacer should be over a half inch. Mine is 3/8”. Going to try to get...
So now I finally understand. Sorry for the duh moment. So I need a washer bigger than the splines on my prop shaft. Would it mess up the splines on the end of the prop shaft?