Website says $1400 painted black to match.
Type: Posts; User: TODDXDC
Website says $1400 painted black to match.
Does anyone on this site have any knowledge of this?
As of today march 14 2024 my patented design air intake that has been installed on all kinds of boats with mercury 4 stroke motors. It was...
That turned out nice, I need to invest in that setup. Good video!
I run a 36 volt lithium and two wet cell batteries in my 721 w/Merc 250 4S and haven't noticed any speed loss 75-77 mph solo 24 Fury. I have a 10" Bob's hydraulic plate with power poles. I hear a lot...
i heard if you're running poles you gain nothing with a 12" plate. i have basically the same setup except 10" bobs hydro and poles and 76 mph solo and 74 mph with partner and we total around 500 lbs....
Mine does it also!
I'm glad I checked it out today and was able to stop it.
2020 250 pro xs 4 stroke
Serial 2B738451
I noticed after fishing and installing transom saver with motor tilted up that water would run out of my cowling. I decided to run it in a tank to see if...
I changed the water pump out this past weekend and the old one didn't look very bad. I put it back in the tub and ran it for about 15 minutes and watched the temperature on the vessel view mobile I...
I believe the water pressure was too low. Was looking into smartcraft setup to get better readings, but now I may go with the vessel view. I will need to find a good phone holder to keep phone from...
What is the latest and best priced smartcraft to add to my 2020 Mercury 4 stroke 250 pro xs, Serial 2B738451. It's on a 2020 Phoenix 721, most Phoenix boats have the black square smartcraft monitor...
Ran it on the hose the 1st time the alarm went off. That's when I decided to run it in the tank. The alarm went off the 1st run in tank also, had water level couple inches over side intakes and it...
2020 4s Mercury 250 pro xs
Serial #2B738451
Today I decided to start my motor and let it idle on the water hose ear muff and used duct tape to put over the nose cone inlets. I have a tank I put...
I currently have a 721 with a 4 stroke Mercury 250 and it came with a 10" manual plate. I'm considering going to a Bob's hydraulic plate. I have been reading that some guys have gone to a 12" plate...
Does anyone know what all is needed to enable me to have the engine gauges readouts on the Helix 12? The engine is a 2020 250 pro xs 4 stroke and boat is a Phoenix 721. Thanks
Check the connections on the main power switch in the battery compartment also, mine were lose when I got my boat. Good luck finding your issue.
Thanks guys, sounds like I've been missing out. Now I just need to decide on which head unit to get.
You guys that bought the livescope, what's your honest opinion of it? Has your catch numbers gone up, tournament winnings increased? Just wondering, I know it's tool that helps and it's only as good...
So the old saying of owning a Skeeter was I can drive it one handed due to no chine walk. Now the new hull design folks are complaining of chine walking. I own a 2019 fx21 with no chine walk and run...
What you guys think would be a good price for this rig with 250 4 stroke with 60 hours? It's not loaded, no poles and has 112 Fortrex and a 9 and a 7 graph. Boats in great shape. Is the performance...
It seems the wingmaster is the issue. If the torquemaster will resolve the issue I will swap over. I know the last tournament I fished it really sucked taking off and struggling to get prop to hook...
Any of you guys running a wingmaster on your 250 pro xs and having blow out problems on holeshot just before boat breaks over? I heard the gen 1 was a lot better than the wingmaster on the blow out...
Don, I have a 2016 Mercury 250 pro xs serial# 2B362443 that I want to swap from a wingmaster to a gen 1 torquemaster. I'm running it on a Bullet 21xrs and I keep hearing others that run Bullets like...
Curious to what's all involved in changing out the 2 piece to a single drive shaft. Heard the 2 piece had issues where the seal rides on the shaft (pitting). Thanks
Serial # 2B362443 2017 250 pro xs w/gen 2 lower unit. Noticed the last 2 trips out the motor felt like it was surging at wide open throttle running 6000-6100 rpms. Running a 2015 Bullet 21xrs at...