Search:

DON may know he be around this week sometime

^^^^^^^ +1 ,,,,, a cyl drop test can isolate non working cyl while boat is underway ..... yes those coil can be problematic,,,,, ive replaced one coil on engines and not had another fail , your call...

remove valve and start engine should be a great amount of air pressure/pulse coming from hole in block

possibly with it being out of normal warranty period a dealer will have to contact tech service and provide requested information on it

could be coil dropping out under load , might be looking at injector failing be careful could loose that cyl if its inj stuck and you keep running it

:thumb up2:

Shure could , bottom port /left/ passenger is #6..... 2,4,6 ..P...1,3,5.... STBD :wink:

i wore one when involved with transplant program , and yes i might surprise someone

yes order your specific hoses from them as well , oem only

no sir it shouldn't the only warranty issue ive ever had with a GEN2 was paint only one ever

screw inside stbd clamp bracket allows you to manually raise or lower engine

ser number please

:thumb up2:

fault scan will provide precise information for you

will need fual codes scanned for precise info on causes , please use the 3.0l forum for your engine 2 more down the list , good luck JOE

^^^^^^^ +1 exactly please use the 3.0l forum for more info on those engines

spark on all 6 ?? you got any pics of those plugs , you may have a detonation problem going on there , also may need to isolate non working cyls

GEN 2 gearcase in a HP application i would use solid hub on the 1.25 shaft although i have not seen the hard shift with the SSR hub and have ran one on one of my personal boats GEN 1 case

oil pump prime is recommended with diagnostic equipment , lap the reed cages as described on this forum ,do a search here form good info, reeds that are to tight or to loose can cause some running...

recommend having faults read /scan to determine alarm cause , possible low voltage

inspect top edge closely most seem to crack there

:thumb up2:

^^^^ +1

:thumb up2:

fuel ;pumps will be a buzzing sound port side of engine