Search:

Don, can you confirm that I’m reading this correctly. My engine serial 2B110063 needs plug izfr6j and to be gapped at .042-.044”? Also what is the “go no go method”?

the VVM software can only be updated via mercury diagnostic tool?

When I received an alarm and the vessel view mobile stated on the fault code as “invalid software version, please key off and on engines” I took the boat into an authorized dealer and the tech states...

How about if I want to see the fault? I’ve seen other people VVM show faults but mine doesn’t. It’ll always show the screen shot I posted above.

The VVM was purchase at my dealer which is now 800 miles away.

Ive never had an alarm before that incident so I'm not sure. Everything else on VVM works just when there's an alarm it doesn't show...

I tried to reinstall the app and its still causing the same issue. I read in another forum post that it could be that the outboard is set to port side not the needed setting of Starboard. Any...

looking for a set of power pole drift paddles. Im in Utah but am willing to pay shipping.

I just checked that terminal, 0 volts when button is not on, and 12.2 volts when the button is on. Can i just connect my leds positive lead that that terminal? sorry im not very familiar with...

I just got a Rigid TM light and would like to hook it up to my ACC switch at the console. It looks like there's a black wire and an orange/red wire connected to the switch as well as an empty...

Im having the same exact issue. If I take it to the dealer, what should I tell them to do? Thanks!

For some reason when i try to view they faults it shows this...498369

I had a fault on my motor and VVM says "invalid software version and please check your internet and try again" What does this mean and is "invalid software version" the actual fault my engine is...

the service manual says the strainer affects WOT PSI.

498364

Impeller and 3 gasket were replaced.

The strainer wouldn’t affect the WOT PSI?

Does anyone know if Vessel View Mobile will show the fault code? Every time I try to view the code it says Invalid Software Version?498361

The dealer didn't provide me the fault code, and they seem to be either not educated with proper in spec values or do subpar work and BS alot. I called them today and they said 8PSI at WOT was plenty...

This engine doesnt have a hydralic jackplate and i havent adjusted the height at all, I use to get 12+ at WOT but recently its only been 8PSI. Im waiting for those rounded zipties that i have on...

Sorry what do you mean "in a long turn seen um drop too low"?

what temp and psi would you say is in spec?

yeah I always thought an overheat was a solid alarm. That’s why I’m questioning this repair.. are you saying that a 6 beep can be coming from cooling system or compressor?

the telltale is...

2015 Ranger Z118 with Optimax 150 PROSX (120hrs) - Serial number 2B110063

I recently got a 6 beep alarm when out on the lake, I took it to an authorized dealer to scan the alarm. They stated it...

Is this the correct premium plus to add to my gas?

I have a 2015 mercury 150 optimax proxs

Mercury/Quicksilver 92-858026K01 Premium Plus Synthetic Blend TCW-3 Outboard Oil - 1 Quart <MODERATOR...

Is the 2-3 second beep most likely a low voltage alarm? It only happens on the first start of the day.

Any suggestion for an interstate battery?:praying: Id like to stick with an interstate cause...

Is the 2-3 second beep most likely a low voltage alarm?


I was thinking of upgrading to Interstate 31M-AGM but I believe thats a 800CCA as well, would I be better off with a Interstate SC31DM...