I am going to run the Redodo 100ah and 50ah. These batteries got a good review from the guy on YouTube as he did a teardown and test. The 50ah is $169 on Amazon plus $10 off with coupon and the...
Type: Posts; User: Edwardbowen
I am going to run the Redodo 100ah and 50ah. These batteries got a good review from the guy on YouTube as he did a teardown and test. The 50ah is $169 on Amazon plus $10 off with coupon and the...
I decided to go with a stand alone 50AH lithium battery. That should be more then enough to power the Livescope and 93sv. Now with 2, 100ah, a 50ah and a 31 I should be able to power most of...
Garmin 93sv and livescope on the bow
Terrova 24v troll motor that's run from 2 12 100ah lithium. Humminbird helix 7 mega DI/SI on console that is connected to starter battery group 31. This year...
Group 31 marine for starting. Two lithium 100ah for trolling motor.
I am going to install a Garmin livescope to the bow electronics. Aside from going off the starting battery can I tap into one of my TM lithiums and still avoid interference. Due to space I am not...
Thanks Wayne. I guess what I am asking is, now I have helix 7 with SI ( Not Mega Side imaging) G4 on the bow and I picked up a Helix 7 with MEGA SI (3gn) to replace it. The resolution on the g4 is...
I have a helix 7 G4 with SI, chirp and is 1024 x 600v and I am looking to replace with helix 7 G3N
Mega Di,SI and chirp and 480v x 800H.
Is it worth going with the 3gn and less resolution but have...
I am having an on going problem with brush springs keep breaking. I have replaced 3 sets this season. Normal usage. I have rebuilt the entire lower unit. New armature, brushes, springs end caps...
Anyone having any luck for bass on Middle River or Gunpowder
Finally got around to checking it out. The Phillips screw was a tad loose. Thanks for the help. Tomorrow will be the real test.
BTW looking for bass or snakeheads
Hi all. Very new to tidal bass fishing and would appreciate some help. I plan on going to middle river tomorrow and I am.going to put in at Wilson point. Any recommendations on where to begin. ...
Marine batteries have better grids internally. They are made to hold up better under constant pounding caused by waves. Commercial batteries are those used in commercial equipment like over the...
Here is my question. Is it better to have mega side imaging at trolling motor or helm. Currently at the helm but seems like I may be missing something while fishing. The helix 7 on the bow is down...
The origional diaphragm was tight this one is sloppy. May need to get a new housing
Damn I guess I have more work to do.
Hey Joe is it normal for the weep hole to the poppet to have water coming out? I know in an auto water coming from weep hole in waterpump is not a good thing.
Solved problem.this evening. The carrier in the poppet pulled out of the block. Replaced using the new one that I didn't use earlier. Pressures came right into spec. Thanks again Joe and the others
Good call Joe. The carrier popped out of its seat. I did not originally replace the carrier when I did the poppet. The carrier and grommet pulled out together. I installed the new carrier and...
Thanks. I will check out the seal in poppet
Mistake from manufacturer. Should be 2 at 143°
Please tell me if I am wrong. Doesn't the water get pumped up into the bottom of the block and either exit through the thermos after they heat up and then exit the tell and also thru the exhaust and...
Yes all 3 guages are at zero.
1 guage is 50 psi max
2nd is 100psi
And one in boat is a 30 psi.
They all read the same.
This is another view. Goes from top of motor down behind coils to poppet valve.488914
This evening I tried 2 other guages and they all read the same. Pressures are the same as per earlier. Here is where I installed the tee fitting. By the way how much pressure can these pumps...