Check the module and see if it has power and that the yellow wire is connected as it should.
Assuming that your AT is the first generation, make sure the module and your unit is running the latest...
Type: Posts; User: Team Colibri
Check the module and see if it has power and that the yellow wire is connected as it should.
Assuming that your AT is the first generation, make sure the module and your unit is running the latest...
Yes it will.
The lines are probably ringing from your jackplate.
I’m guessing you mean the TM from Power Pole called the Move. That comes with a Navico HDI transducer built in. I’m guessing it has the 9-pin connector, in which case you will need adapter SKU...
The horisontal lines on the HDS Live are typically related to incorrect mounting of the transducer, the vertical drops on the Gen 3 is typically related to running two transducer at similar frequency...
Add water and a few fish. :)
The 2D-element in the AI 3i1 is paused with standby, other channels like AT and StructureScan must be stopped (Menu-More options Stop sonar, for each channel.)
Anyone with more than 50 waypoints should take a serious look at Reefmaster, it is a fantastic piece of software for waypoint-management.
This means that the update changed source-setup in the unit, and thus the unit wants to do a search across the network to find any potential sources. The same thing you can do manually through...
AT2 and AT1 are inter-changeable so he can buy the AT2-transducer and use with his AT1-module.
Personally I turn it off, only to avoid the pop-up telling me the unit has connect or disconnected. I highly recommend that you do all softwareupdates using a PC and memorycard, and with that in mind...
Puls on AT typically means you have another transducer running that you need to stop.
I use my TM as a TM, so I have my transducers on a transducer-pole. :)
This is basically the same with any electronic product you buy. They can be repaired, as long as there are parts available and you are willing to pay the cost. Several options out there that repair...
Lowrance transducer compability (bbcboards.net)
All 83/200-based transducers from Lowrance can be used with chirp as long as the unit supports it (something your Gen 3 does). Follow the link for...
Strange issue. :)
Personally I would do the typical problem-solving steps when there are issues with networking, starting with saving waypoints to memorycard and doing a hard reset on all units,...
If "they" are Lowrance, yes they repair units within warranty.
Ethernet synchronizes waypoints between the units in the network. Yes, with ethernet waypoints will show up on all networked units automatically.
If all you have are the units and AT, ethernet is...
Probably worth a read:
Lowrance HDS Gen 3 and software 18.2 (teamcolibri.blogspot.com)
If you can read a manual and know how sonar works, no it is not worth it.
Pages, then Files/ Storage on the left, click on the memorycard and then on the update-file. Click yes on the menu that pops up to start the update.
Remove one transducer, you can not run these two at the same time and there is no point in having both has they have the same functionality.
Yes and yes (plus HDS Pro).
Nothing, as your unit simply can`t display this kind of data or network to your outboard.
Look to HDS or Elite FS for such functionality, combined with a NMEA2000-network and Vesselview Link or...
With HDS Pro, yes it is.
With HDS Live, you need the S3100 module to use AI HD.
Ditch one transducer, you have severe pingnoise due to using transducers that work in the same frequency-range. There is no point in combining TotalScan and SS 3D.
