I like having the waypoints overlayed on the 360 so to me the heading sensor is a must. Rarely have to look at the map once I get on a piece of structure...and when you need to repositon the boat...
Type: Posts; User: Enduro67
I like having the waypoints overlayed on the 360 so to me the heading sensor is a must. Rarely have to look at the map once I get on a piece of structure...and when you need to repositon the boat...
For Solix on previous software the master could change every time you power on.... whichever unit you power on first becomes the master.
You only manually select a master graph when you re-establish...
I also have not had any further map sharing issues after dropping back to just 3 Solix Graphs on the ethernet box.
My network never shared maps very well even with the original Gen 2's before I was...
I fought network dropouts all year after upgrading from Gen 2 Solix's to Gen 3's.
I finally gave up on the one boat network ideal and dumbed my network down..
I took the Ultrex off the network...
My Gen 2 Solix were very picky on the type of SD card.
I had to call humminbird support and they talked me through everything in the download process...even checked all the file names that were...
I have had same problem and have not been able to diagnose it because my whole network has been buggy all year.
And in my case the waypoints that I marked off sidescan were no where near where they...
Main reason to me to watch the bait is to keep it above the fish and out of the brush if I am crappie fishing.
Sometimes will try to lift bait if I see one on it that wont bite it.
If I put the...
I had two 3 month old Gen 3 Solix's with similar issue....locked up during boot up.
Humminbird had about a 1 week turn around from when I shipped then in to when I got them back.
(not including the...
Update:
I contacted Humminbird...they sent me a a/c power adapter to test unit with to verify not a voltage issue. Same result
Returned both graphs to Humminbird for service.
They repaired and...
Whatever you buy i would recommend you add a heading sensor so you can mark waypoints directly on the 360 display.
I use that feature all the time. You can mark the key rocks / trees or...
I had major issues on my last trip again. I had totally dumbed down my network in an attempt to keep get it to run smooth through a two week trip to Minnesota.
Evertthing worked great for about 5...
Dont waste money upgrading Graphs unless you just want the speed..I went to all Gen 3's and still had network issues.,,,maybe even more than the Gen 2's
My 360 does seem to run better on a Gen 3...
I was getting similar network dropout issues with my four Solix network using all 5 ports. I upgraded all my graphs from Solix Gen 2's to Gen 3's and replaced the ethernet hub and with every new...
Hello:
I have a brand new Ultrex 112 52" that I just installed on my boat.
When I lift it to stow the leaf spring wants to bend the wrong way and bind up...makes a loud popping sound when I stow...
My 360 is always only view I have up and its a Solix... so my issues are different...they are more related to sidescan from the console than 360.
Usually when my waypoints are off I find that the graph with the heading sensor has been lost from the network. Or the network has changed the gps source to global and it is no longer using the bow...
I had the same issue with my Ultrex Ipilot link on my last trip. Sometimes it would work fine....but sometimes when I hit spotlock it would take off full throttle and seem search around for its...
Dont want to Hi-Jack this thread but I have a semi-related question.
For a stand alone Solix 12 dedicated for MEGA 360 only.....wanting to add a dedicated heading sensor so it can accurately...
I have been fighting this same issue all spring.
It actually began two years ago but I didnt realize then what was going on.
It would randomly lose the heading sensor, stop sharing the map chip,...
Well it just so happens that is what I tried first thing.
I powered on the master...let it boot up then powered on the last graph that I tried to add to the network last night.
Was expecting to...
I leave tomorrow for a week long fishing trip.
I need to get the network in a configuration that I can fish with and not have too many issues.
So the only idea I have is to run the 360 on a graph...
Update:
I went ahead and replaced the remaining Gen 2's with Gen 3 graphs.
They all came preloaded with the current 3.13 software.
I made the graph with the 360 the Master and added in the...
Guess I will make my 360 graph the network master since it is the one I power on first.
I have that issue alot of times...sometimes I find that the heading sensor source has been lost on the sidescan graph.
I catch it sometimes marking waypoints on the opposite side of my trail and...
Ok thanks for reply...That is similar to what I was going to try next...which is dropping out one graph at a time and see if I could get to resync.
I will get the master setup roughly the way I want...