Know this is a long shot,but am hoping someone has a working spare Skeeter DMS Touch pad for the front bow panel that the woul dpart with. I suspect someone whose DMS brain crapped out swapped to...
Type: Posts; User: DarHans
Know this is a long shot,but am hoping someone has a working spare Skeeter DMS Touch pad for the front bow panel that the woul dpart with. I suspect someone whose DMS brain crapped out swapped to...
http://www.bbcboards.net...-help
http://www.bbcboards.net...61993
After replacing the screws twice, I was done. This was the best solution I found, took a little longer, but it is rock solid for a year now.
Called the Dealer and asked for a new set of filters. He stated that they never have to replace those and has to order one.
Do I replace the VST filter, or just clean it?
Thanks guys... Will check the fuel systems in the next day or two.
If any other Tech's want to chime in, please do so.
Need some help to assist in determining what my issue is, as yesterday I had this occur the first time ever:
While running at WOT for 2-3 min, my engine shuts down with no horn, or warning lights....
You should be able to contact any Skeeter dealer and have them direct ship them to you.
My dealer is South Austin Marine in Austin, Texas.
In regards to the email address, they should be still active.
Let me know if you have an issue.
However, I would contact your dealer for a replacement skin. Skeeter Execs and I spent az...
Did you get the correct pumps? You may also pull the 6 screws that hold the pumps onto the block, pump up the bump check for leaks, then place some water muffs on and try to get it to run. Both cases...
I know that most would say it is obvious, but the core of the wire may have broken. Otherwise I would check the electrical connections to each ignition solenoid.
Broken Plug wire?
I would like enough to replace two straps. Please let me kno if you can support.
Thanks!
DarHans@aol.com
Be careful using 800. I would recommend using 1500 for those who have not done it before. If you feel the metal flake before your start, this process will not work for you.
Use plenty of water to...
I have a 2001 ZX225 and my rear seat pedstal would get loose about every six months. After doing this for the fourth time around and realizing I hate moving and streching like a ballerina to do this...
Chris,
Email me at work and I will send you a POC at Skeeter that helped me on my Seat Covers: (See My Post: Skeeter Seat - Need Owner Rebellion). In my situation, we solved the issue for the...
Send me your bottom price with specs of boat accessories on your Blue Skeeter.
What is the cost to add the 2nd Console?
Thanks
Darhans@aol.com
ZX190 Mike,
That was why I got involved in this whole ordeal to begin with...
I think things are better and in tougher economic times it pays to be better in customer service to generate...
ZX190 Mike,
Yes at the time I started this Post; I had obtained a Quote from my Dealer on a replacement Butt Seat at $220.
Not sure what it is now, but I would guess that you got a wholesale or...
Rookieboy,
I got an email back from Skeeter:
Short Answer is that your seats MAY not be supported due to the seat was manufacturered by a outside supplier that they may not have the patterns to...
Rookieboy,
I have sent Jeff Stone an email directly regarding your issue and asked him to respond on the board or send you a direct Instant Message.
Would be helpful to have your email address...
Skeeter Dealer... Bought a couple just recently: They were $18.95 each at South Austin Marine in Austin Texas. They can drop ship too. mention you need the Cam and they will throw one in.
If your not wanting to salvage the transducer: Most are very hard to salvage, but can if gently pryed out and cleaned with a dremel tool.
Here's how I removed mine from a couple of different boats...
mnbassman,
Thanks for the clarity on your input. That is awesome news:
Yes I have found that Skeeter is really stepping up on customer service for those who own older boats.
In the current...
BassNGal G:
Please be sure to highlight this is a recent policy change at the Skeeter Factory and perhaps they should check with the Service Bulletins or contact Skeeter (Tim king or Robert Young...
Here's my Posts from another post:
Folks,
I am happy to announce that Skeeter has completed thier investigation, development and implementation of obtaining OEM Seat Covers for Skeeter Boats: Jeff...