Yes Sir I called tech support and was on the phone with them for 1 hr and 52 min troubleshooting it. They offered to cover the work they did but when I took a picture of the bottom of the rotating...
Type: Posts; User: MikeBelter
Yes Sir I called tech support and was on the phone with them for 1 hr and 52 min troubleshooting it. They offered to cover the work they did but when I took a picture of the bottom of the rotating...
I have a Mega 360 that was just fixed in August because the screen was going dark on one side or the other at random times (although usually the right side was worse.). Since doing the new updates on...
I'll ask the mechanic what those exact numbers are. Mercury wants a run-down test before they authorize a new powerhead but the cable they need to connect from the computer to the engine is on...
I'm not sure what the leak down test showed as far whether it was gasket vs. valves vs rings that were failing. The mechanic says they tested for everything else they could think of and couldn't find...
Yea but is a new powerhead installed at the dealership going to be the same power, performance and durability overall compared to the entire motor that was built at the factory? I imagine that when...
I have a 225 Pro XS (3B383447) I got on the new boat I bought in March and took it in because I have never been able to get more than 5700 rpms or so. Wanted them to check it out and they couldn't...
Everything is 87-91 degrees rn around here lol
I have a mega 360 that used to be pretty clear and now I have multiple problems that occur intermittently. I'm networked into two Helix 12's (console is GN4 Mega SI and bow is GN3 Mega DI) and use an...
I'm considering different options for mounting my MSI transducre for my Helix 12 MSI. I like the transducer shield with block under the engine setback but I am a little concerned about placement and...
Thank you, that is good to know!
Sorry, I would provide the serial number but since it was a used boat I was looking at and not my own I didn't know what the serial number was. So what should I be looking for when I ask for a...
Thanks!
My Mega live was losing connection and I noticed that right under one of the rubber fittings that is used to strap the cable to the shaft there was a break in the cable and and after I peeled back...
Looking at a used boat at a dealership, what compression should a 2020 225 HP Pro XS Four stroke have on each cylinder?
Yea it probably is less than 1/2" low.
That makes me nervous as to why I didn't get a fault on my smartcraft when it started using oil from my engine mounted oil tank. I understand my warning beep wasn't working but still should have...
My start up beep on my 225 Pro XS (2B122654) gave me sort of a weird crackling sound on Sunday morning and then went silent all day. When I got home I noticed that I had run my remote oil tank very...
Yes it was a rail diaphragm. Two of them actually. The drain screws on the VST were just a little loose causing seepage.
Yea I'm wondering why there was any leakage at all. The allen screws were not real snug though so that may be why. Not sure if that's related to my idle issue though. But at least something to report...
There's some fuel seeping from the tube that connects the drain on the VST. But the problem I noticed was entirely happening at idle. When I ran on plane it seemed to run just fine.
I have a 225 Pro XS (2B122654) that started idling very roughly after a 15 min run yesterday. It was also hard to shift back into neutral. When I start the engine it revs up to 1500+ rpms immediately...
It doesn't matter if I run the trolling motor or not, doesn't matter if my other Helix is turned on or not, and I checked the fuse in the head of the Ultrex it is good.
No other fisherman in the areas, no difference in hardness. It is like either it would go into a "wagon wheel" on the outer rings or it would completely blow out. Then it would start working normal...
I recently updated my Helix and noticed that when I used my Mega 360 this weekend on the James River near Richmond I had intermittent interference when I was near the city. Sometimes it would be a...
Where do you see the date? I've looked and can't find it or maybe I don't know what I'm looking at. I usually buy in bulk since I go through at least a gallon a month or more. But this time I had a...
