I bought mine new in 1998. It's been that way since the day I got it. It's second nature now to make sure it's level or slightly trimmed up every time you stop. My guess is when trimmed too far...
Type: Posts; User: RayJackson
I bought mine new in 1998. It's been that way since the day I got it. It's second nature now to make sure it's level or slightly trimmed up every time you stop. My guess is when trimmed too far...
Sorry for the late reply...
The sticker on the side plate of my motor says it requires a bp8hn10 and that's what I had been running in the past. I have replace it with a bpZ8hn10 which seems to...
After 2 days on the lake, I believe it's safe to say the resistor spark plugs have solved the interference problem I was experiencing.
I had a very similar experience with a guide on guntersville last summer. Just wondering if it was the same guy, or if that's just the way they do it there. I had never experienced a guide who...
a little update... because of the ghost readings I was getting with my digital volt meter, I decided to check voltage with an old analog meter. Actual voltage was right at 14 at idle. After a...
I'm back and was hoping to report success. I replaced the regulator with an OEM. First trip to the lake everything worked perfectly for the first time in years. I thought the problem was fixed. ...
JOE,
Thanks again for your response. I'm assuming it's only the regulator that needs to be replaced. Is there a recommended replacement to purchase? I'm seeing options from $25-200
EuropeanAM,
Thank you for your response as well. I should have noted that both transducers were mounted inside the hull.
On a potentially related note, is 15.58 volts at the battery at idle...
JOE,
Thanks for taking time to respond. It just seems odd that I've experienced problems with 2 different units that were 20+ years different. The only thing that really ties it to the outboard...
I have a 1998 Mercury 115 2+2 Serial # OG738893 on a 1998 Nitro that I've had since new. At some point over the years, the humminbird depth finder, also original, began losing depth reading while...
I'd like to add using the shortest extension cord possible for the job.
I believe it was manufactured by the Skip-Jack boat company in TN, which no longer exists.
ESP Rods - I use the 5'6" UL for 1/64 - 1/32oz jigs on 2lb test. Pair it up with the smallest pflueger president.
... you a call. Thanks.
sorry, hit the enter key too soon and it posted...
I found a schematic online which should allow me to test it a little further. If things continue to test out, I'll give yu
i found a schematic online which shoul
Thanks for the information. I'll try to reach out to him.
We have a local water reservoir that was lowered 18-20 feet for maintenance. This past Friday, my son found a Minn Kota Power Drive motor that is complete with the exception of the foot pedal. It...