I also have a 192 super pro and have been looking to see how guys are mounting poles. I'm thinking would need at least an 8 inch plate due to the onset of the motor
Type: Posts; User: Flippin1
I also have a 192 super pro and have been looking to see how guys are mounting poles. I'm thinking would need at least an 8 inch plate due to the onset of the motor
You will spend that on a newer boat that still has a used motor with unknown condition. You know your boat in and out. I say if it does everything you want repower
Love my procraft 192 super pro. 18 1/2 foot fishes huge for it's size handles rough water very well and scoots along nicely with a 150 although max is 175
Are you sponsored and looking for how to layout?
I think wheeler would still dominate without electronics. He can flat out read water. I don't really care who wins but he is one of if not the best to ever grace the sport
Fluid change after 100k will not hurt a power flush can as it knocks loose all kinds of crud. Just drain and refill do this a few times over about a 1000 mile period to remove all fluid. I have done...
Line it with cement board that will help with fire to a point.
Also I'll add that everything was done through my back and not my gut as for the second surgery they had to remove the hardware from the first one
I have a L1 to S1 fusion. The second one actually the first was L1-L4 my pain has been reduced not eliminated. Still many bad days. After over 3 years off work I am back to a 40 hour max work week. I...
I still use punctures. I switched to clips for a while and while I never lost a fish I had a lot of tournaments where they were looking pretty damn bad. As soon as I went back to punctures they are...
I just bought an extremely clean 04 192 super pro with 04 150 xr6 for 12,800. 15 is probably where you would want to be at
Weight has nothing to do with it. Hull design set up etc.. for example my buddy and myself both have 18 1/2 foot glass boats his has a 175 efi mine has a 150 xr6 my boat runs the same speed as his
Vinegar / distilled water mix. Mix it hot. Like 60% vinegar spray on let sit. Wipe off. If it's really bad soak a rag in it and let it sit over the spots for a bit
Quit using armor all. It's highly alcohol based which is what's ruining your plastics. Colinite 845 insulator wax can actually be applied to plastics rubber etc.. and not turn white like a typical...
Only one way to find out. Do a thorough inspection of transom. Let er rip
If they are working as they should no need to do an update. I quit doing updates unless my graphs started glitching on mw
Messed with it in the garage and it started working. The oy thing I did different was get rid of the big multi plug and plugged everything in individually
Installed new helix 10 g3n on the bow for 360. When I select the screen for 360 it says optional accessory required to support this view. The 360 works perfect on my helix 9 g2n mega. What am I...
Will look into them thank you. What does it cost to have a prop blueprinted and balanced
04 procraft 192 super pro. 04 Merc xr6 150. Running a 23 tempest plus. Rpm at full throttle is 57-5800 and 56.8 mph depending on conditions. The motor is rated at a max of 5600rpm.
Obviously...
Put vents in the livewell lids on my tracker the livewell was small 20 gallons? Never lost a single fish after an uncountable number of tournaments and many 15 to 20 pound bags
Thanks guys. Ordered the 1000 going to try it and see what happens. If it end up being too much I'll get a 750
It is a Johnson pump. Boat has a 34 gallon livewell. Need it to fill a lot faster.
Can you replace a live well cartridge with a higher gph cartridge of the same brand. I currently have a 500 gph pump and it is getting weak. Want to replace just the cartridge but want to go with a...
Fixed. Was the loose terminal