Ours has one in the ammo aisle but not the fishing aisle.
Type: Posts; User: dabassking
Ours has one in the ammo aisle but not the fishing aisle.
Updating this post to add some more info and ask more questions. I connected the steering wires in the TM pedal directly to 12v and it steers but draws 4+ amps. So that tells me my steering motor is...
What glue do you use? I’ve tried gluing in the plastic dividers before and have never had them stick.
Omnia is an online tackle retailer like Land Big Fish or Tackle Warehouse. They’ve been around for a few years now and are great.
Maybe there are refresh rate setting or something I can play with. I’ll do some more digging before ditching it. Thanks!
Got on the water a couple days ago and it looks like the point 1 and helix don’t communicate very well. The heading seems delayed and the gps speed was very low. It read 0.9-1.0 mph when idling...
Any chance someone has a trashed ultrex laying around that I could use for parts? I’m needing a steering motor.
Is it possible for someone slightly mechanically inclined to check these parts on their own? I am not the original owner and it’s definitely out of warranty.
Im editing this post to add some more...
Looking for help trouble shooting my ultrex. I deployed it today at my first spot and couldn’t get the pedal to move. Prop spins just fine. I bluetoothed to my phone to use the app and the app...
Anyone have a good way to keep the cable tray covered and protected when the graph is off the boat? I had a Lowrance on a ram mount by the console and I always just tucked the cable ends under the...
I would go to Hartwell. A buddy and I made the trip from KY last year and it was worth it.
I figured it out. The two side trim pieces of the glove box pop out and there are screws under there that I needed to remove.
544786
I’m upgrade my electronics so I’m trying to pull my old stuff off. I have a Lowrance structure scan transducer ran from my transom to my console that I can’t get out. The cable is stuck or fastened...
It’s probably inside the actuator. An A60 actuator has a shock and a spring inside them. I’m not sure if your trailer has an A60 actuator or not, but if not it’s probably similar
On long casts I try to make sure I’ve reeled the slack out before setting the hook and I set the hook with a sweep to the side, still pretty hard though. I just make sure it goes to the side and not...
I’ve ordered from here a few times. https://www.ereplacementparts.com/abu-garcia-parts-c-187196.html
I run a 1222 about 10 hrs with a 32ah Amped with no problem as long as the brightness isn’t at 100% the whole time.
I’ve seen conflicting info on this online so I figured I’d ask here. I’m switching from Lowrance to Humminbird. Will my existing Lowrance Point 1 heading sensor work with my new Helix G4N units since...
That’s pretty ridiculous
Paid via Venmo
fantasy name- Tsheff86
543249
On my ‘08 Triton I used the Str8up 5” riser with dual plate, but flipped the dual plate around so the taller graph is on the bottom. This gave me enough room over my TM pedal for my toes.
Change of bait color or speed might make them commit.
Same for me too
I got skunked yesterday too. Fished Beaver, Caney, and main lake in between and only got one bite. Never graphed much bait or anything. I was pretty lost as to what to do by the end of the day.