Search:

At the factory vexus hangs an aluminum bracket off the trolling motor bolts inside the hull. Then
They mount it there.Call them and have them send you one.

Impulse lithiums starting and trolling. Power pole charge charger. Four practice days and three tournaments two in 20 plus MPH winds and i haven’t had to plug it in yet. Granted I’ve been running...

2022 Mercury Pro XS 250. I noticed my trim wasn’t going as high as it should be last night. Found the set bolt for the upper pin in the trim cylinder loose and tightened it. Trim is back to...

I have a VX 21 on order and i ordered the 47” Lowrance Ghost TM but I’m having second thoughts. Seems like the VX series sets a little higher in the water than other bass boats. Should I change the...

In watching all the prop recommendations I have come up with a question. Seems like anytime someone has a hole shot issue people recommend for them to pitch down . Example 26 to a 25. I had this...

I have the same 520C with 250 HO etec and two power poles. It was embarrassing having to send the Passengers up front to get on plane. No excuse for it for the amount paid. Ended up with a Fury 4...

I have a 2014 Etec 250 HO. I've had issues with it since I purchaed it new last year. During the first take off of the day it comes out of the hole great but then after it's warmed up It drops...

Ha! I kept thinking that and looked about three times. Went home last night and found the ground wire that SOMEONE (I won't mention any names) missed when he went to hook things back up. ...

Looking for some advice. I replaced the crank battery on my 2014 Ranger 520C. After installing the new one I have no power to the console. I have power to the power poles so I know it's making it...

I've had both. They looked and preformed exactly alike except for the vent holes. And the Raker 2 actually has more venting area than the HO with the adjustable holes.

I put a Fury 4 25 on my 520c this past fall. I really like it but I just found it strange that the RX4 hasn't been talked about that much

Someone might have mentioned it on here before but I did a search and came up empty. Does anyone have an opinion/ experience with the RX4 prop? If so what are your thoughts?

As much as I hate to admit it the Eco Boost makes the V8s look sick. Get the Eco Boost.

I moved the prop up from 3.5" with a top speed of 67.4 to 2.5" below pad and hit 68.5 but I didn't like the ride. I'll probably settle in at 3" below pad and I have all the vent holes open.

I can tell you what I know from mine. 2014 Ranger 520C two power poles, 250HO Evinrude, I struggled during the heat of the summer to get up on plane with a Co Anger myself and tournament loaded. ...

Ummm. No. Hit the wrong button. How about 68.5. Has a Ranger 520 ever seen 78 mph?

David, You have probably gotten your answer by now but If you look above I hit 67.4 with a 25 pitch loaded heavy at 3.5" below pad on my Ranger 520C with a Evinrude 250 HO. I moved the prop up to...

Nope no blow out. Just luged along at about 3200 RPMs and wouldn't pull itself out of the hole.

I was running out of daylight. Just wanted to get it out and do a quick test. I talked to several people who recommended I start out at 3.5" below pad. I will probably play with that when I get...

Fury 4 Report. 2014 Ranger 520C, 2014 Evinrude 250 HO set at 3.5" below pad, Two Power Poles, Tournament Loaded, Fuel Full, Live wells full, I weigh 215# and I had 280# of Sand bags in the passenger...

The holes release the exhaust pressure until the prop gets up to rpm's. The bigger or more holes you have the quicker the engine will wind up. Negative is you will spin out if you have too much...

Ha! You probably just answered my question! It has a Gen II 12" at the dash and a Gen II 9" up front. I'm moving the Gen II 12" to the front and Installing a Gen III 12" in it's place. Then I'm...

It has a Raker II on it. No plans to change it this year.

It's got a Raker II on it. I don't know the pitch or size.

Thanks!