Printable View
This is on a 2017 Eyra.
Any one got a different mount to help lower this 15” solix down as much as possible?
Im short and struggle to see over the top of it. Really don’t want to run 2 12” screens.
This is a Dek-it mount.
https://ibb.co/y5TmJVZ
https://ibb.co/C7ZQ33x
https://ibb.co/9mXpXyK
That’s about as low as you can get it. I ran a garmin 16” and it was a lot better because it’s more rectangle than square.
the BBT mount I know will be a bit taller than what you have now
Get a booster seat
Looks like these would help by using a 'shorter' gimble.
"Cheyenne Series" Humminbird Gimbals (bassboattech.com)
The shorter gimbal brackets may help. What you need to watch for is some of those are meant for mounting perpendicular to the graph and no on the plate like your current set up. I have a mount on my 14 puma from Hennessey with a solix 15 and it sits pretty much the same height as yours.
you are correct, the shorter gimbles will not let your graph screen to be verticalQuote:
Originally Posted by BDA79
Bass Boat Technologies
the BBT mount is a good mount but it makes the graph sit up very high. And in the eyra you sit a tad lower even with a 12” on a single bbt it’s a little challengingQuote:
Originally Posted by Bill2e
https://cdn.shopify.com/s/files/1/03...g?v=1585883264
We have some options available as well!
Shoot us call for info.
270-703-6133
Not the gimble,but what the gimble is mounted to. Unscrew it from the plate and turn it over. Will the gimble fit inside of it?