Fish catching w/Livescope
Ok, here is my first video of Livescope. I'm "drifting" the local waters where i fish all the time. Since there is no recording from the Ultra units, i set up my camera in front of the graph. I'll have to work on getting better/clearer videos.
Setup: Using 2 10' jig poles with jigs ties about 12" apart (4 jigs per pole). I just drop them straight down and look for fish. The 4 "dots" are my jigs from each pole and if you look at 2d, you will see the lines which are jigs along with the fish i catch.....
A few descriptions of the catches so anyone can understand what's going on.
#1 - Look at left side of screen, you will see a fish come into view and head straight for the jigs.
#2 - You dont see it on LS image or 2d but its hugging the bottom pretty good until it rises up to the jig.
#3 - You will see a fish on botton swim past the jig and as soon as i move it the first time, it turns around, move it again then strikes.
#4 - You cant see my jigs as i dont have the TM rotated just right but you see the fish come into view (left of structure) stops then goes up, i hook the fish but it came off near the surface, then i drop jigs back down and another fish comes up from bottom to take the jig.
#5 - Sorry about the water drop on camera lense; there is a fish hanging around the top of structure; drop a jig and get it to bite.
I'll also say that objects that appear in the viewer are smaller than they appear....:laugh:....sometimes the fish looks decent until you bring it up and realize its not that big......
https://youtu.be/ycmfEIvEJ-k