Anybody got any pics of how they installed a 10 micron filter on a zx225.
Thanks in advance,
Donnie
Printable View
Anybody got any pics of how they installed a 10 micron filter on a zx225.
Thanks in advance,
Donnie
We don't have any pics, but if you call the store tomorrow our service tech can walk you thru it http://www.bassboatcentral.com/smileys/thumbsup2.gif 859-881-5266
Not a ZX225 ... but a TZX 190 ...... same difference http://www.bassboatcentral.com/smileys/wink.gif http://www.bassboatcentral.com/smileys/Laugh.gif
I bolted mine to the aluminum transom stiffener with 2 stainless steel bolts.
Pardon the mess, this was before I zip tied everything back up after the install.
http://i5.photobucket.com/albums/y17...v/102_2348.jpg
Looking at mount from the opposite direction so you can see the exact bolt location.
http://i5.photobucket.com/albums/y17...v/102_2352.jpg
Looking at it from the livewells back toward the transom, that way you can see how the filter is above the step in the transom.
http://i5.photobucket.com/albums/y17...v/102_2354.jpg
Hope this helps. http://www.bassboatcentral.com/smileys/thumbsup2.gif
http://www.bassboatcentral.com/smileys/popcorn.gif
I am about to undertake this project also. I have a ZX250 with a similar setup to those pictured.
So are these mounted after the fuel selector switch? I still want to be able to run port or strbd tanks separately. What kind of extra parts will we need besides the filter assembly and the bracket? Looks like there are dual fuel line inlets to the filter. Is this standard on the filter assembly?
Another question. Should I still use the Stabill for ethanol after this is installed?
Thanks.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shadillac1 »</TD></TR><TR><TD CLASS="quote"> http://www.bassboatcentral.com/smileys/popcorn.gif
I am about to undertake this project also. I have a ZX250 with a similar setup to those pictured.
So are these mounted after the fuel selector switch? I still want to be able to run port or strbd tanks separately. What kind of extra parts will we need besides the filter assembly and the bracket? Looks like there are dual fuel line inlets to the filter. Is this standard on the filter assembly?
Another question. Should I still use the Stabill for ethanol after this is installed?
Thanks.</TD></TR></TABLE>
All you have to do is splice in your line to the engine. The line your bulb is in. There are dual inlets, just block 2 of them off. All you need is an inlet and outlet. You can still use the tank selector switch. I cant remember if the fittings came with mine or not, but your local boat dealer or Lowes will have what you need. You will need two barb fittings and two plugs, as well as hose clamps. Yes you should use a fuel stabilizer. Personally I use Seafoam and I think it does a great job, Im sure Stabil works just as good.
That was quick !
Thanks for the info.
http://www.bassboatcentral.com/boardstuff2/beers.gif
Thanks guys!!!! Really appreciate the help. have not got my filter yet but just wanted to get an idea of how its done. May have to ask again when I get the filter. Where's the best place to order the filter? http://www.bassboatcentral.com/boardstuff2/beers.gif
Any boat dealer should have them in stock. I got the yamaha kit for around $48.
I can't remember the cost but I picked mine up as a kit at West Marine. I do remember I had to buy the hose barbs and hose clamps as extras but the cut-off caps were included. I also went to Lowes to get my mounting bolts. But I think mine was somewhere around $50 all said and done.
[ edited out wrong info on my part]
Yes, still us Marine Sta-Bill, or Seafoam ...... as well as RingFree. http://www.bassboatcentral.com/smileys/thumbsup2.gif
Modified by Ranger391v at 1:08 PM 2/16/2010
I picked up the filter assembly and the fuel barbs today. The local dealer said to install it before the bulb. I see where many are installing it after. Just wondering if it makes a big difference? Seems like you would want it before the bulb and then the bulb would draw the fuel from the selected tank to the filter then pump it to the motor if need be. I have never had to prime the motor yet (knock on wood) but would hate to find out I didn't hook this up correctly when needed later on.
Thanks
My dealer hooked mine up like in Chargers picture, it's a zx 250.
So primer bulb before filter on your ZX250? That's what I have.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Shadillac1 »</TD></TR><TR><TD CLASS="quote">So primer bulb before filter </TD></TR></TABLE>
http://www.bassboatcentral.com/smileys/thumbsup2.gif
aka filter after primer bulb http://www.bassboatcentral.com/smileys/wink.gif
[edit note ... I told you the above info, but was wrong .... please see further down in this post]
Modified by Ranger391v at 1:09 PM 2/16/2010
Gotcha. http://www.bassboatcentral.com/smileys/thumbsup2.gif Now gonna have to figure out a mounting location. So far it looks like it is going to have to be mounted in the middle of the lip on the back deck up against the back of the livewells. Only place where space will allow on the ZX250. I think this is where Charger has his mounted as well. Looks like it is gonna require a 3/8's drill bit. Hopefully there is enough of that lip exposed to ge tthe bolt hole in it. Otherwise may have to come up with some kind of bracket.
I'll post the pics when I am done.
fill filter with fuel than take a little oil and wipe it on rubber gasket and screw on http://www.bassboatcentral.com/smileys/thumbsup2.gif
ok question guys, can i eliminate the dual tank switch if i just run both tanks into the filter and one line out to motor or do i need to leave the switch there.
Why do away with the switch just leave it http://www.bassboatcentral.com/smileys/thumbsup2.gif
I have a SX 190 and mine is placed before the bulb. No problems. http://www.bassboatcentral.com/smileys/thumbsup2.gif
Shad' ........ fishin couillon is RIGHT ! ! ! !
I just went outside, uncovered the boat, and realized I WAS WRONG !
This is how I REALLY have it.
fuel tanks -> fuel selector -> 30m water/fuel filter -> primer bulb -> motor
I told you wrong and I'm terribly sorry for that. http://www.bassboatcentral.com/smileys/praying.gif
Good catch 'FC' ! http://www.bassboatcentral.com/smileys/thumbsup2.gif
No worries. I have just got started. I am taking detailed photo's along the way of my installation to post up on the board later.
Shad,
The pics would be great. I am planning this upgrade in the next week or two