Does somebody have/know where I can test a 24 pitch fury prop?? I want to try one ,but I have no idea where I can find one to test?? Thanks! http://www.bassboatcentral.com/boardstuff2/beers.gif
Printable View
Does somebody have/know where I can test a 24 pitch fury prop?? I want to try one ,but I have no idea where I can find one to test?? Thanks! http://www.bassboatcentral.com/boardstuff2/beers.gif
Call a Merc prop dealer and see if they have a demo porp you can try. You need to try Bump's 24 Turbo.
Yea, come to the rally and you can try both( sorry Jason and Doug, I'm new at this prop whore thing) of my props. If not we will hook up later.
Bump
from what i have seen with jimmys zx and pro xs the skeeters aint liking the furys near as well as they like the txp's
thanks bump. Depending on work i might not be there, just started a new job and it is crazy right now.
He just cant stand the thought of GUN smokin the gel off that bug boat!!!!!!!!!!!
true; however, I have a chain in one of my co-partments to hook the cat/e-tec up.........dont worry doug I will pull you back to the landing when you break down! I am that good of a person...... http://www.bassboatcentral.com/smileys/stirthepot.gif http://www.bassboatcentral.com/smileys/Laugh.gif
I will pass you at 3800 rpms and coast to the landing!!!!!!!!!!!!!!!Atleast the merc guys can break 60 on the bugs!!!!!!!!!!!!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fishnhunt »</TD></TR><TR><TD CLASS="quote">true; however, I have a chain in one of my co-partments to hook the cat/e-tec up.........dont worry doug I will pull you back to the landing when you break down! I am that good of a person...... http://www.bassboatcentral.com/smileys/stirthepot.gif http://www.bassboatcentral.com/smileys/Laugh.gif </TD></TR></TABLE> You better take an old oil jug and tie on the end of that chain so when you hit A big wave and crack that bug boat in half and sink it , atleast youll know where to go back and get your motor . http://www.bassboatcentral.com/smileys/stirthepot.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gun Runner »</TD></TR><TR><TD CLASS="quote"> You better take an old oil jug and tie on the end of that chain so when you hit A big wave and crack that bug boat in half and sink it , atleast youll know where to go back and get your motor . http://www.bassboatcentral.com/smileys/stirthepot.gif </TD></TR></TABLE>
NO NEED ITS A HAMMER!!!!!!!!!!!!!! http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gun Runner »</TD></TR><TR><TD CLASS="quote"> You better take an old oil jug and tie on the end of that chain so when you hit A big wave and crack that bug boat in half and sink it , atleast youll know where to go back and get your motor . http://www.bassboatcentral.com/smileys/stirthepot.gif </TD></TR></TABLE>
BPP is good at putting them back together http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif Better than factory http://www.bassboatcentral.com/boardstuff2/pimp2.gif
hey I can break 60 on a light chop with the current.... http://www.bassboatcentral.com/smileys/Laugh.gif
61 to be exact........... http://www.bassboatcentral.com/smileys/popcorn.gif
what about with 2 people?????????I hope roger dont pass you too!!!!!!!!!!!
doug why u hating?/ I aint hodnett here! http://www.bassboatcentral.com/smileys/Laugh.gif I have not once bragged on my speed! http://www.bassboatcentral.com/smileys/doh.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOUGMCGEEPUMAFTD »</TD></TR><TR><TD CLASS="quote">what about with 2 people?????????I hope roger dont pass you too!!!!!!!!!!!</TD></TR></TABLE>
If he comes to the rally and gets passed by Roger, that would be pretty bad as he will be in my boat.
Bump
I might have to tinker on the sled and get it over 60!!!!!!!!!!!!!! http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif then as you pass the lil bug you can swat it!!!!!!!!!!!! http://www.bassboatcentral.com/smileys/devil.gif http://www.bassboatcentral.com/smileys/devil.gif http://www.bassboatcentral.com/smileys/devil.gif
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOUGMCGEEPUMAFTD »</TD></TR><TR><TD CLASS="quote">what about with 2 people?????????I hope roger dont pass you too!!!!!!!!!!!</TD></TR></TABLE>
hey Doug my bug runs good for a 17' http://www.bassboatcentral.com/smileys/stirthepot.gif
It dont have no hammer on it. http://www.bassboatcentral.com/smileys/stirthepot.gif http://www.bassboatcentral.com/smileys/stirthepot.gif
I hope this Turbo prop is going to do the trick. After I get to "run" it and get it dialed in I am going to send it to Mark for some magic. Maybe then I can get 60. If that don't do it I will take the TM and all of the tackle out and just use a cane pole and some crickets.
Bump
Bump's Ranger has more in it, he just felt funny raising the jackplate anymore than we did...and watching the water pressure go down.... http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif
Bump just needs 2in. jackplate spacers, trim extenders, get Mark to work the Turbo, and a Phase 2 kit.....its just money...... http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif
i think i could get 65 out of it if his check book is big enough!
Like the sign at Jaco's says " Speed cost, how fast you want to go?"
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DOUGMCGEEPUMAFTD »</TD></TR><TR><TD CLASS="quote">i think i could get 65 out of it if his check book is big enough!</TD></TR></TABLE>
It's not. That is why I ended up with the 150.
Bump
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bump »</TD></TR><TR><TD CLASS="quote">
It's not. That is why I ended up with the 150.
Bump</TD></TR></TABLE>
We can turn it into a 180 really easy... http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif And you don't need the whole Phase 2 kit.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rebel1 »</TD></TR><TR><TD CLASS="quote">Like the sign at Jaco's says " Speed cost, how fast you want to go?"</TD></TR></TABLE>
I've been fast, made other people go fast and now I just want to fish.
Bump
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rebel1 »</TD></TR><TR><TD CLASS="quote">
We can turn it into a 180 really easy... http://www.bassboatcentral.com/smileys/roll.gif http://www.bassboatcentral.com/smileys/roll.gif And you don't need the whole Phase 2 kit.</TD></TR></TABLE>
Hydro Tec is cheaper than what Ascension wanted for the 175 on that boat.
Bump
no lets do a phase 3 maybe some nitrous .I can pull the 3 stage nos system off the small block and drill the intake on the hammer if you want!!!!!!!!!!! http://www.bassboatcentral.com/smileys/wink.gif http://www.bassboatcentral.com/smileys/wink.gif http://www.bassboatcentral.com/smileys/wink.gif Never tried it on an outboard but it'll make a 350 believe its a 502 bigblock!!!!!!!!!!!!!!!!! http://www.bassboatcentral.com/boardstuff2/pimp2.gif http://www.bassboatcentral.com/boardstuff2/pimp2.gif
I bet.
I'll add another fuel pump for the nitrous. I think I will need to pre mix for that.
Bump
Lets see if we can get A blower mounted on that thing too , and maybe some racing fuel . http://www.bassboatcentral.com/smileys/popcorn.gif
I got some c12
If we are going to put a blower on it, I'll need to get a PSI screw and some methanol.
If you get to Lake charles come see me you can use my Fury 24.