Printable View
Nice, yeah if I had more deeper water around, I would likely check out an Airmar but unless I'm in the channel most of my fishing is 8-10ft or less... I think my next big change will either be adding HB (SI+, DI+, VX Mapping) at the console, or pulling HB alltogether and going with dual LVS34's, ie two Garmin's on bow and keeping the two HDS Pro's at the console. Can't decide lol...Quote:
Originally Posted by theitguy
this my second trip on the water with 25.1 . I have a live 9 inch live on my console with a 3 in 1 on sonar channel 2 and a in hull on sonar channel 1 a 16 inch live on my bow with a 3 in 1 and AT2 . I fixed the problem i had with the 9 inch showing no depth sourced from the in hull on channel one by using the sonar , depth local and selecting the last box i think its is page selected . It works fine now so i am now a happy 25.1 user,
I've installed 25.1 to all units including AT without issue. I always double check on the unit that the unit is up to date by going in and manually reading that software is up to date, which it is: 25.1. However, when I start units I get an indicator to no power off as the unit is updating. I don't remember this from before and makes me doubt the update even though units show latest and greatest 25.1
Common issue with Pro's - only Pro's for some reason. The "updating" message "sticks". It's not hurting anything, but hopefully Lowrance corrects it along with a few other issues that cropped up with 25.1Quote:
Originally Posted by GOFISH$
Does it seem to anyone else the delay on AT 2 is worse after the update? I've only been out twice since the update, and it'll be a couple weeks before I can go out again. When I do, I'll try some different pallets and contrast settings. Before the update I ran the contrast 84-88, after the update it's down to 80-84. After the update the noise rejection has to be on medium or at minimum low and I feel my small jigs are harder to see on the screen.
The next time I go out I'll have the previous AT 2 software version on a card and will revert to it if I feel it's needed.