Yup, just downloaded updates for my Pros and AT2.Quote:
Originally Posted by Basshopper
Printable View
Yup, just downloaded updates for my Pros and AT2.Quote:
Originally Posted by Basshopper
I hope to be seeing some kick azz pictures here the next couple of days!
I’ll wait for your replies with kick azz pics before I climb on board with the new update. :nanner:Quote:
Originally Posted by Bass in the grass
edit: I don’t know…no issues, then issues and then no issues:doh:
Bass in the Grass are you running AT1 or AT2?
Quote:
Originally Posted by mnmatt
at1 and carbon. I don’t know what’s going on, it froze up multiple times over an hour, requiring me to turn it off (the graph) each time. The only thing I did differently between yesterday (no problems at all) and today, I had increased the range to 75’. After freezing up a few times this morning, I took the range back to 50’ and it never messed up again.:confused2:
Edit: But…I did try the ghost 360 scan once, so I don’t know which was causing the lockup, the 360 or range.
3xLIVE 12s, AT2, Point1, Dedicated power...updated AT2 box and MFDs...
Mixed bag of results for me...first it looks great and the main issue I had with AT2 locking up losing bottom when Ghost pulled from water is fixed. I did continue to hit STOP SONAR before pulling TM up but tested and it did not lock up if I didn't. On the downside it did act a little flakey with screen flashing occasionally looking like it was going to lockup but didn't. The directional icon froze/bonked out after 10 mins, Restore Defaults, it lasted about 5 min, bonked out, Restore Defaults, it lasted about 20 mins, etc...this went on throughout the day I eventually turned it off.
So I am really pleased with the images and loss of bottom/freezing has been corrected...wish the Icon deal had been fixed...in my system it's worse than before. With that said the Icon issue isn't nearly as bad as entire AT2 locking up.
Related to the MFD update it did cause my console unit to loose all of the transducers and scramble a few settings...but only that unit.
Good luck.
-Jonathan
Well this evening, mine froze once in 3 hours, never froze before. Yeah, I screwed up doing the update.
Until the new update, just change the screen to a different screen, like Sonar, then back to AT. Works for me.Quote:
Originally Posted by Bass in the grass
Just ordered active target 2. Now I read this thread
did they ever fix the issues or am I in for a mess?
The update fixed the freezing on mine, at least the two times I've had it out.Quote:
Originally Posted by JVG
AT2 is golden now.Quote:
Originally Posted by JVG
Thank you guys.
I will have 2 9 inch screen on the bow of an 818 Pheonix
What brackets are you guys running?
any suggestions greatly appreciated
Running a Live 12 and AT2, with the AT2 just recently installed. Before going out I updated my graph and AT2 with the latest updates. Went out this weekend to test it out and had zero issues. Pulled trolling motor in and out of the water without stopping sonar and had no problems. This was my first time using AT and it was great. Was on the water roughly 4 hours with no issues.
Marc, I watched your videos before installing my AT2... thanks for the detailed contributions!Quote:
Originally Posted by Marc Marcantonio
Glad they helped! Please share the channel with your friends so they subscribe. I am almost at 1,000 subscribers which helps me to continue the channel. Thank you.Quote:
Originally Posted by jbabin76
Link to your videos please.
Go to YouTube.com and search for Marc Marcantonio. There are many videos, too numerous to list. Please subscribe to the channel and you will stay in the loop on future videos.Quote:
Originally Posted by JVG
These should get you started:Quote:
Originally Posted by JVG
Backup Lowrance Settings: Why and How
https://youtu.be/v_zx2qJ16mY
Performing a Hard Reset (Lowrance): When, Why, and How
https://youtu.be/GwF_Juw9EDM
Backup Your Waypoints (Lowrance)
https://youtu.be/DAT8peyjSrs
Installing Lowrance Active Target 23.3 Update on Dual AT2's
https://youtu.be/7ogL_46YcaA
Installing Lowrance Active Target Update 23.3
https://youtu.be/aMIO6c9LPCI
How to Install Lowrance Update 23.3 to An HDS Pro/LIVE/Carbon/EliteFS
https://youtu.be/_pLk7pv_Xgk
Lowrance HDS Pro HDMI Port Fixed by 23.3 Update (AquaVu Camera)
https://youtu.be/XB8kKY3ohvc
Dual Active Target 2 Install and Transducer Leveling Part 2
https://youtu.be/A86ibrP9SXw
Dual Active Target 2 Install and Transducer Leveling Part 1
https://youtu.be/YQPDmGMT-0o
Thank you. I will subscribe like and share