Im confused. I have three helix units and i bought ac pro. Did i just waste money? When i should have just bought a zlc? Whats the advantage in my setup of 3 helix units to having ac pro?
Im confused. I have three helix units and i bought ac pro. Did i just waste money? When i should have just bought a zlc? Whats the advantage in my setup of 3 helix units to having ac pro?
You cannot make copies of your Auto Chart Live maps unless you have the computer software.Quote:
Originally Posted by jasonG
If you create an Auto Chart Live map on one unit and want that same map in all three units, you need three Zero Line cards and the computer software to make those copies to the cards.
You got one ZLC with the computer software.
You cannot share map data between units, each has to have its own.
So the benefit is i can buy another zlc and transfer the data with the ac pro
with the zlc i had no intention of using ac live. Is there benefits to using the ac live over just recording to the zlc
If recording data to create mapping you don't record to a ZLC card. You record to a blank formatted memory card. Then load that data to Auto Chart Pro to create the contour mapping. After that you copy the created map to the ZLC card so you can use it in a unit.Quote:
Originally Posted by jasonG
The ZLC has outlines of bodies of water that the created map contours are place within. Zero Line means Shoreline. It is basically a map card with no contour mapping. You make it contour mapping with the software.
You can write Auto Chart Live data directly to a Zero Line card.
One more thing, ANY Humminbird unit that is sonar/GPS with a card reader can do recordings that can be used to create Auto Chart maps with the Auto Chart or Auto Chart Pro software.Quote:
Originally Posted by jasonG
The only way to use those maps in a unit is copying it to a Zero Line Card. You would have the map on the card and on your computer. Make as many copies as you want to purchase Zero Line cards to do it.
After the data is used to create the mapping it functions in the units like Lakemaster digital mapping.
thats the thing wayne why did i buy the ac pro if all i need to do is record ACL to my zlc while on the water? The only benefit i see to the PC software is the ability to copy a zlc card to another zlc. Which isnt a bad thing since helix doesnt share mapping at this time. All my units are helix 10 and 12Quote:
Originally Posted by Wayne P.
What does this mean then "with the zlc i had no intention of using ac live" ????Quote:
Originally Posted by jasonG
You could have just bought a ZLC, but now you have software to edit and manipulate the AC/ZLC data or recorded sonar data .
Useful if you have a bad shutdown (need to stop recording before shutdown) or if there are some bad data points that should be removed.
AC PC isn't an easy to learn program but is pretty powerful stuff.
I bought AC PC standard as it was only a few bucks more to have the software and 2 licenses.
ACL IS recording AC/ZLC data to the card/unit directly, I think using AC PC was the term Jason meant?
You can also just record sonar data to a plain SD Card and use that for AC PC import.
Universal Mania does have a good price on additional ZLCs FWIW.
Does anyone know If I have to deactivate AutoChart on my PC before changing my hard drive disk (switching to SSD). Or the license is tailored to the motherboard not to the hard drive?
Thanks in advance!
If you're using drive imaging software and are cloning the drive you shouldn't have to deactivate the license only if you're moving it from pc to pc is my understanding.
So I have an 1198 now and thinking about a Helix and have two questions.
First can I take a map i made on the Helix and move to the 1198? I have the Autochart pro PC software?
Second question is if network the two units can I have the Helix unit use the transducer that came with my 1198 at times if I wanted?
Best bet is a second ZLC, unless you feel comfortable creating and renaming folders...
But you can import ACL data to convert to AC PC format WITH the latest patch in your HB account IF you registered the AC PC software.
I recorded hours of AutoChart Live on my ZLC in the Onix 10's on my old boat.
I put Helix 12's on my new boat but I can't get the AutoChart live maps on my ZLC to show up in the Helix!
I've checked the card properties and it's full of data.
Searches and HB service hasn't helped.
Any ideas?
The card has lots of data on it without adding any contour mapping. It has all the zero lines (shoreline) that the contours are placed within.Quote:
Originally Posted by kdietz
Checking "properites" does not show what data is on the card.
The acdata folder has the contours and the Lakemaster folder has the shorelines and software data.
After reading this thread, I now understand the differences between AC PC and AC live. I am using 2 Helix10 SI units. I am unclear on how many bodies of water you can store on one zero lines card. I have two smaller unmapped lakes near me. Would I need a separate zlc for each, or am I allowed to map and store both lakes on one zlc?
thanks
-dmh
No problem doing those lakes on one card.Quote:
Originally Posted by dmhpro
This is copied from the Lakemaster site:
" 32 GB SD card containing zero lines for with over 140,000 named water bodies and over 1.75 million unnamed water bodies in the United States and over 96,000 named water bodies and over 3.85 million unnamed water bodies in Canada. Plus there is 16 GB of free space to maintain your custom maps."
I have parts of 6 bodies of water on my ZLC.
I doubt you would ever fill up a Zero Line card in your lifetime.
What may not be on a ZLC is the outline of the body (zero line) of water you want if it is a small lake/pond. You can create that using the computer software, I think.
I'm curious about what AutoChart Live settings others use for:
Map Color?
Min depth?
Max depth?
Help I just purchased AC pro at Cabelas Friday. I installed the program on my laptop and registered it. I installed the zero line card in my unit. 998c si. It shows a lk zl card in which ever slot I put it in. However I don't get any changes in the menus or even have any idea that it is installed on the 998.
When I put the zero line card in my computer I only have lk master and profile folders, no ac or si folder. The lk master folder does contain ac files but I see no si files or folders. Is my card faulty. I have not deleted anything, the only reason I put it in the computer is to see why it wouldn't work on the unit.
I am updated to the latest software on all device's.
There are no contour maps on the Zero Line Card and your 998 does not do Auto Chart Live. Zero Line means SHORELINES or the Zero contour line.Quote:
Originally Posted by 1johnb
To use what you have, you have to RECORD to a blank formatted memory card, load that data to the computer software to create map contours where your recorded, then copy that contour map to the Zero Line Card that your unit will read as Lakemaster mapping.
My question is are my si and ac folders missing. Or will I not have them on the zero line card until I convert a map and install it on the zlc?
The reason I ask is the instructions say not to delete those folders, which I did not as they weren't on the zlc.