I do the same, get the best detail for particular locations like points, humps, steep drops, etc.Quote:
Originally Posted by kzoofisher
This particular body of water, I just did a submerged pond dam. I had already done most of the lake with Navionics Sonar Charts.
http://www.bbcboards.net/attachment....d=333062&stc=1
Hi guys, I trying to help my frend with AC live, but I have Helix5 1 gen.
I've a question about transfering shoreline data to AC live. Is it possible? I saw camohunter tutorial about creation shoere line from Google Earth, done this .kml file and import it to AC.
All what I need is save as ACI? What should I do when maximum mapping area in AC is smaller than lake?
Thanks in advance.
If you read thru Mike's tutorial you will see you save as a .KML file, import that to AC PC and save it as an .ACD (AC PC) or .ACU (ACL) file.Quote:
Originally Posted by kzoofisher
The shore and shore lines on my updated Onix don't match up.
Is there anything I need to do before I start mapping a small lake with ACL?
Read this thread:Quote:
Originally Posted by bick11
www.bbcboards.net/showthread.php?t=922487
The background is the default Onix map from the last update and the internal Onix GPS unit is located above the transducer on the bow.
I use a single Zero Line Card in my Helix 7 CHIRP SI GPS G2, SOLIX SI, ONIX SI, or Helix 12 CHIRP SI GPS. I either do ACL directly to the card or do it in the unit's memory and then transfer the data to the card.Quote:
Originally Posted by bick11
It works the same way in all the units---loading data or reading data.
For one body of water, I also upload either the ZLC data files or upload a Track to the Auto Chart LiveShare program and then download the data back to the ZLC. The Shared program will do the contour map creation using recorded Tracks.
Thanks, I appreciate your response.
Have a Helix 10SI Mega and recording AC Live.
There are times where my depth reading goes from 6 ft to 20+ feet and it really screws up the AC Live data when it happens.
It makes it look like there is a huge drop off when there is none.
Others have this issue? Perhaps discussed before? I dont have the time to surf through all the pages.
Thanks for tips/guidance.
Yes it’s been stated quite often.Quote:
Originally Posted by BoilermakerRT178
Thanks Wayne...is there a conclusion or fix? Or its still an open issue.Quote:
Originally Posted by Wayne P.
Still pretty much an open issue.Quote:
Originally Posted by BoilermakerRT178
I have this issue with some new units as well. I called Humminbird after seeing all of the different suggestions all over the internet. They stated to go to the sonar settings tab and switch "Digital Depth Source" to auto. Not sure if that helps much since I haven't been on the water a lot to test it out. They also said there would be a future update to fix this issue.Quote:
Originally Posted by BoilermakerRT178
It doesn't help. Mine still does it with source auto.Quote:
Originally Posted by Stainless69
If they don't release a fix for this soon, I'm going to pack this shit up and FedEx it to them along with a letter from my lawyer. Junk.
Just getting started with Autochart. Very promising feature, but the digital depth issues are a real problem. Kind of hard to focus on advanced features when HB can't seem to make the basics work but I'll try to line item my questions:
Solix 12 SI with Y cable separate 2d, external GPS/HS Issues= Double depth in shallow (sens 6 clutter 7) and Crazy Ivan when trying Follow contour on Lakemaster Graph housing also gets HOT!
1) I have the issue where at some point below 10-12' it starts to show double depth Has reducing sensitivity and increasing clutter helped? Like drop sens way down or is this just affecting the double bottom part?
2) I'm on a reservoir with fluctuating water levels. I understand how to use the water level offset and the daily level data is available. First time out I was -4' but now will be -1 likely. Is the AC system smart enough to take care of this automatically so long as I change in the settings?
3) How bad does rocking boat in wake affect the mapping? Just keep going?
4) I'm intrigued by the pro software. I've seen areas that have a lot of submerged wood. I'm thinking a DI mosaic would be nice to have so I can locate easily. Also for ice fishing. Is this feature as neat as it seems and can it display the depth lines over the mosaic?
My setup is as follows:
Fishfinder:
Humminbird Helix 10 Mega Chirp SI G2N
Sofware Version: 1.840 (Latest)
Trolling Motor:
Minn Kota iPilot – Link
Controller Software Version: 1.240
Remote Software Version: 1.170
Software:
Auochart Pro Version 2.3 (Latest)
Includes Africa Zero Lines SD card. ( I live in South Africa)
I purchased this mainly because I was impressed with the follow the contour and follow vegetation features. The control part of that actually works well on my boat. Very happy and impressed with the control aspect of the setup.
There ae a few problems though. I have found ways to work around or cope with most of them. But I think they can be improved upon.
When I create maps on my Autochart Pro software
The maps I get are pretty good. The vegetation shows up where it is in reality. I know this as I have extensive experience of the water where I did the mapping. Very happy with the maps I create. So far so good…
When I display the maps on the control head:
Couple of issues here.
THE MAP SOURCE
When I got to Map Source on the Control head, I get the following options:
1. Auto
2. Contour XD
My Zero Lines SD card is not a contour XD card? (This is confusing)
Obviously if I try to use Contour XD, my mapping does not work. When I put it on Auto, my custom maps can be shown using “Autochart” as either a base layer or overlay.
So, although I can use my custom maps by selecting “Auto” as a map source, why does “Contour XD” show up as an option if it is of no use? And why is there no explicit option to use my custom maps? Or why does the Africa Zero Lines Base Map not show up as an option? I am very confused here. Oh well at least I still get the charting to work in spite of the confusion.
THE VEGETATION LAYER
This is what the vegetation layer looks like on my PC after creating a map with Autochart Pro:
https://imageshack.com/a/img921/6686/qzANyz.jpg
And this is what it looks like on the control head:
https://imageshack.com/a/img924/2391/OaWTfc.jpg
Vast difference.
I tried adjusting the Vegetation Layer Options. No joy. The Min and Max vegetation settings are just scale related. It only sets the “sensitivity”. It does not correct the position, which seems to be the problem here? Changing the Gain Offset does nothing at all. That is also confusing. Should it not have some effect.
I am very surprised that the vegetation looks absolutely perfect on my PC, but utterly screwed up on my fishfinder.
Any ideas?
ContourXD is the built-in background mapping that the 2006 coverage of Navionics Premium and Gold had.Quote:
Originally Posted by Vicus Horn
Auto Chart is read with the Auto setting, so is Auto Chart Live.
Auto just means the unit automatically chooses an inserted map card.
If you have a Navionics map card and inserted it, the unit will automatically load it.
In the US, we can add Humminbird Basemap to the units’s memory. That is the 2017 coverage that Lakemaster had. It becomes the default background map with no map cards inserted. Still can select ContourXD if wanted.
The vegetation display might show different, because possibly your head unit is reading autochart live files, not the actual AutoChart map you produced on your computer. Try backing up your ACLive folder off the SD card onto your computer, and remove it from the Autochart SD card, then try it on your head unit. See if that is the case.
When running Auto Chart am I able to use the split screen and view Di or side scan while recording? I'm not sure I worded this best. I want to be able to record and use the other features if I can.
While recording, you can use ALL other features without affecting anything. Recording runs in the background, and is just saving raw data.
Can 2 solix units share ACL from 1 zero lines card though Ethernet ?
or will I have to move the card between units?
I'm not a Solix/Onix guy and suspect Carl or Wayne will be along shortly, but the ACL format is "basically the same" as LM and should work fine as far as I know.
Auto Chart Live cannot be shared. Auto Chart can. Two different file types.Quote:
Originally Posted by Pigdog72
Good to know.
I'm glad I have AC PC and AC Pro PC.
Maybe I can get rich doing file conversions for people LOL!
:thumb up2:
Is there a way to clear a zero lines card so I can start again?
Yes, delete the ACDATA folder.Quote:
Originally Posted by Pigdog72
You may what to copy that folder to your computer if there is a chance you may want that data later.
Yep - or just move all the files from it to your PC JIC....Quote:
Originally Posted by Wayne P.
I deleted acdata folder but when I put the zlc back in the sounder the ac maps are still on the card any help
You'll have to record 8 hrs of new data to overwrite the current data stored in the control head.
Or manually delete all the data off the unit which is tough to do by deleting data points.
I have a 999 and I wanted to see if anyone on here has the AutoChart Pc Software with the card they would be willing to part with?
I tried (for the first time) to create a mosaic map overlay with the Solix 12 (with the new software update). I've attached an image of what the screen looked like. It looks like it's recording intermittently. It did appeared to function correctly for a minute or two, and then would clear the mosaic, and start displaying the data again. Once I got off the water and tried to import the mosaic, the images that were cleared from the display were not present. It's as though it restarted the recording each time it cleared the screen and any previous data was lost.
https://i.ibb.co/wKNXskw/20190203-160250-1024x768.jpg
Just a question here as I'm a newcomer to Auto Chart. I'm a long time user to the HB with a background to the Bottom Line then the first series 987csi. I have installed the latest Solix G2 flagship units and need to get up to speed on this subject, sorry for the long introduction.
Out of the 50+ pages on this thread where might I beginge on this subject? I've been through many videos of Dougs "Tips and Tricks" videos over the last couple of years (in my viewing time not his distribution timeline).
Where is a good starting point to catch up on the the latest with the newest software or maybe see a glimpse of the resolved past issues?
Attachment 364459I used Autochart Pro last summer and had no issues but now when I open it, I can't get a clear picture. I can zoom in or zoom out, but the background map is blurry as ever. I'll post an image to show what I'm talking about. I've changed my screen resolutions but don't know what else to do with it.
That background map looks like the basemap in an ONIX or SOLIX. It's always blurry when zoomed in close.Quote:
Originally Posted by NCbound3
I have been trying to figure out if I can put in a blank ad card in left slot and start recording a lake as I use the lake master map in the right slot
Yes, just record in segments of about one quarter to half hour in case your data is corrupted by a depth glitch.Quote:
Originally Posted by goose_716
Hello guys. Is it possible to watch mosaic map from LiveAutochart out of HB Solix? AC Pro or another software?
You can record SI mosaic with the Solix. You can also do a data recording an do SI mosaic maps with AC pro.
Thanks, Bob. That all know, but I try to compare mosaic quality AC PRO vs. mosaic overlay from LiveAC.My friend sent to me record data from Solix, and .sim file from LiveAC(with same area)Quote:
Originally Posted by Bob B
Can't open it- .sim file , Record from Solix is easy to open with ACPro- need only rename file Rec000... to R000... This tricks not working with Humviewer, unfortunatley.
Lowrance structure overlay is not impressive vs. Reefmaster/Sonar TRX.
I'm trying to compare HB data in different software and LiveAC
I do not have a Soix, so I can't help much. The one thing I didn't like about mosaic with AC Pro is that instead of merging the SI data if you path overlaps .... it replaces the data. I don't know how that is handled with AC live in the unit.
With 2D depth, the each time you cover an area the accuracy is improved by merging data. I don't know if they ever did that with the SI mosaic or not .... it has been a while since I researched it.