Transducer wire from outside....

Quote:

---

Originally Posted by DREWTICK

I ran 2 transducer cables, 2 10/2 wires, 2 16/2 wires, and 2 18/6 wires all in one pull with the fiberglass rods. yes that may sound crazy but I got a lot of goodies to add soon as it warms up.
there is plenty of room once you turn the corner around the big floater block.
these were taken of my buddies 920
http://www.bbcboards.net/attachment....d=223534&stc=1http://www.bbcboards.net/attachment....d=223535&stc=1http://www.bbcboards.net/attachment....d=223536&stc=1http://www.bbcboards.net/attachment....d=223537&stc=1http://www.bbcboards.net/attachment....d=223538&stc=1http://www.bbcboards.net/attachment....d=223539&stc=1

---

That is a freaking mess! Hope it's easy to locate what wires you need if you ever have to work in that a rats nest.

that's not my boat, but that is how it looked before we started
just factory wiring

Anyone have a picture showing the cable ran this way with the chrome pc back in place?

http://www.bbcboards.net/attachment....d=236045&stc=1

Thanks not sure why I double posted!

One more request, is the hole drilled perpindicular/90 degrees in relation to the transom?

its straight in right where the rubber ends, mine has 2 1" holes cut out between to make a 2x1" oval hole due to the 3D transducer and others, lots of marine silicone when finished

http://i46.photobucket.com/albums/f1...psetpyex5j.jpg

http://i46.photobucket.com/albums/f1...psetpyex5j.jpg

Right here?

Looks like the correct spot, but what is that black thing with the bolt?

Power pole bracket

Oh, thanks. Maybe someday I'll get a power pole and so will know what it is. :-)

I love it but right now it's in the way!

that's the spot, careful lots of wires on the inside
take picture of the hole after drilling for future questions from others

Quote:

---

Originally Posted by DREWTICK

that's the spot, careful lots of wires on the inside
take picture of the hole after drilling for future questions from others

---

http://i46.photobucket.com/albums/f1...ps0qdfqhgt.jpg

Forgot to take pics at the time but thats what i did above ^^^.