Printable View
I just bought a card specifically for Sonar Charting Randleman. We fish it almost every weekend.Quote:
Why doesn't Randleman Reservoir in NC show up on the Navionics WebApp? Been around since 2006 I think and not on it. I haven't checked my card yet.
You guys can help each other and everyone else.
If you share the Google Earth Track photos you get when you are notified that the uploaded data has been processed, you can cover the lake faster to make it accurate faster.
Andre, have 4 plug ins on back, from left to right from back view, 2 blues, 1 yellow, 1 black. Tried update w/ black disconnected and other 3 on w/ no success. What's nest? Yellow off? Thanks, Bill
There is 2 plugs for network. 1 little black and 1 yellow. Try with the black and yellow unplug
Will do. Tried w/ yellow only unplugged this morning and still no good. Will try w/ both unplugged.
l
ooks like Andre has you covered Bill. Good! I had no idea on that one.
thebradybunch - I would to see some of the screenshots of your tracks while your logging. I'll PM you!
Andre: no luck w/ update w/ black and yellow disconnected. What's next?
Thanks,
Bill
The only thing left:
Check the software version, delete the update on you're sd card and re-download the update and be sure to select the right one; happend to me the other day. I had the new version for a HDS and I'm running a Touch; re-download the right one and it work perfectly.
If those solutions don't work, I don't know what to do after.
Thank you for your support Andre!
I uploaded some tracts this weekend. They were not tracts I recorded for Sonar Charts but tracts from being on the lake over the past year prior to getting Sonar Charts. As expected several of my tracts were unusable but some were good. I received the following email from Navionics:
- Of those, for 11 logs we are in the process of mapping/updating the coastline of the area with your uploaded sonar logs.
Your sonar logs will be saved, and in the event that it/they can be used in the future, you will be notified.
What do they mean if your logs can be used you will be notified in the future?
Quote:
Originally Posted by thebradybunch
What that means is part of some of your recordings were shown on land because the shoreline is not accurate.
When/if they re-draw the shoreline, they will process those recordings and let you know.
All of these will show on land because this lake has never been charted. The web app doesn't even show there is a lake there. How will they handle that? That sounds like I just wasted my time getting Sonar charts to map a new lake.Quote:
What that means is part of some of your recordings were shown on land because the shoreline is not accurate.
When/if they re-draw the shoreline, they will process those recordings and let you know.
No you did not waste your time.Quote:
Originally Posted by thebradybunch
They have to change their world base map to include the shoreline/zero line using Google Earth. That process may take a month or longer, depending on how busy they are. Someone has to manually draw the lake outline. It is tedious work-- I have done a couple myself using Google Earth Paths. The lake below is one I did so I could have a shoreline reference for my waypoints.
Docks will be included when they do the zero line.
This is a lake I did that had no mapping of any kind. I had been fishing it for several years before the Sonar Charts program was started and have about 100 waypoints there
Before:
http://i238.photobucket.com/albums/f...ps468ac33f.png
After a few uploaded sonar logs:
http://i238.photobucket.com/albums/f...ps15448dbf.jpg
Notice the map curser is at the same waypoint.
This is the Google Earth Path outline I created for that lake several years ago:
http://i238.photobucket.com/albums/f...tingRunmap.jpg
Ok, thanks Wayne that sounds a lot better than what I was thinking they meant. I am looking forward to being able to share some of my pics later.
Just curious what is the name of this lake? I would love to see it on the Web app.
When they create the new outline, the Nautical Charts will have it with the lake colored blue. Only Sonar Charts will have the contour lines.Quote:
Originally Posted by thebradybunch
Nice work Wayne. Them screenshots are so impressive. I have a few coming here soon I'll share.
I checked out the Navionics Webapp tonight and noticed the lake that I sent in Sonar chart files for is now drawn in on the map. There wasn't even a lake there last week. I assume the next step will be seeing some contour lines on the map from the data I uploaded.
Yep, that is the way it works.Quote:
Originally Posted by thebradybunch
When your data is added, you will get an email letting you know it is ready to be downloaded and you will get an attachment with the trails on Google Earth. Print that so you have a reference where you need to fill in data.
thebradybunch - any chance you can send/email or PM me the lake so I can take screenshots to demonstrate the process for my electronics seminars?
I just got my Navonics+ card a couple of days ago and have been looking at lake maps. I noticed that the lake I fish at most because it is the closest shows 45 feet of water where there are actually islands.
The deepest parts of the lake seem to be pretty accurately marked. This lake has no water over 35 feet deep even when the lake is at normal level. At normal level, the submerged islands would have 10-12 feet of water above them, but the lake is about 17 feet low. The normally submerged islands are actual islands now but they show 45 feet. The lake is Canton Lake in NW Oklahoma.
markm55 - No doubt. You don't see this too often either. I checked the SonarCharts layer to be sure they hadn't fixed the discrepancy and it was consistent with the Nautical Chart. It appears to me that the islands and the "45" foot holes match up perfectly and when they were formatting the lake that somewhere in there the islands got written in as holes instead of islands. Like I said it's rare but no product is perfect and this map definitely needs to be corrected.
Because of SonarCharts this map can be corrected relatively easy. I'll submit a request in for correction. It is definitely a SonarChart needed lake. SonarCharts
markm55 - say, shoot me over a PM with your email and we'll work to get this map corrected. Thanks!
I heard a rumor the other day that was very interesting to me. I was told by a friend of a friend who heard from this one guy (you see why I'm questioning the validity of this rumor) that one of our local lakes is supposedly going to be re-surveyed for a new Navionics chart. The lake is Sakakawea in North Dakota. It is in dire need of new survey. Apparently, the lake was surveyed when it was approximately 25 feet below normal pool. Is there anyone that I can contact to find out if there is any truth to the new survey rumor?
Start by looking here:
Navionics Webapp
I have a Lowrance Elite 7 HDI. I think the best choice for a Navionics Card is the Navionics Plus. It is only a 2 gig card. What i need to know is how much data is 2 gig. Say if I down loaded all the lakes in Alabama would it hold all of them and would there be any left. I need Alabama and Eastern Tennessee.
A Navionics Hotmaps Premium regional card is 2GB and it is not full. There is room for Freshest Data updates for a while.Quote:
Originally Posted by Merc 200
The 2009 Premium regional card is a 1 GB. Only after the data exceeded the 1 GB capacity around 2012 did the Premium regional card get changed to 2GB.
With what you want, there is plenty of room including the Sonar Charts.
Another feature of the Navionics+ is you can delete what is on the card and start over.
You have a year to do all of that. A new purchase of any Navionics product includes a year of updates.
I have an old navionics east chip that is the SD size not micro. My new unit is micro only. Navionics use to have a trade in program so I could change to a micro card. Do they still have something like that or do I have to sell my card and buy a new one?
Quote:
Originally Posted by icebound
There is no trade-in program.
Most all the Navionics cards now are micro-SD with a SD adaptor. They have some issues for "off brands" that use a different format.
You can get the Navionics+ software for $99 MSRP by purchasing the Navionics Update card.
You use the current card to active it, then it becomes the Navionics+ version.
Then you can keep or sell your current card since it is still usable.
Navionics+ also includes the Sonar Charts program and has no maps. You choose what to download to the card from anywhere in North America--no regional restrictions like you have now.
MSRP of the Navionics+ is $179.
MSRP of the Hotmaps Premium is $149
MSRP of the Hotmaps Platinum is $199
Both of those are regional versions like you have.
Cool that works even with my card being from 2007 correct?
Yep! You're old card is the key to open the new oneQuote:
Originally Posted by icebound
Just to clarify something; I recently purchased the Navionics Updates. When I receive it and use my old 2006 card to activate it; is it only a one time download of the lakes/areas of my choice or can I go back at any time and download more? Example, my first destination will be KY Lake, can I just download KY/Barkley area then weeks later download the region of Wisconsin I'll be fishing, then weeks later download regions of Minnesota I'll be fishing, etc. etc. ?
Yes you can add and delete wathever you want for 1st year. At the end of the 1st year you can purchase another Update or you save what you want.
I have Question on Zoom Level. On my HDS 10 Navionics will only zoom into 50ft. where the Lowrance insight map zooms in to 20 ft. is it the unit or the card.?
50ft. with the Navionics and 20ft with Insight. I had to opend my Touch and look at it because I never need to zoom that close when fishing
How does the saving work? Can I only save to the card or can I save areas and store them on my computer for future use?Quote:
Originally Posted by wallyandre
There is no "SAVE" functionQuote:
Originally Posted by RangerR81
The locations are downloaded directly to the card using Navionics software.
That is the only way to process the map data.
You can't buy the software that does that.
That didn't answer my question.Quote:
Originally Posted by wallyandre
Must be the card! The unit can zoom in to 20ft with the Lowrance mapping and it zoom in to 50ft with the NavionicsQuote:
Originally Posted by rocket man