2010 Stroker- Redline is done!
I want to thank Chub, Alice, Gary, Jason, and Stanley for building Redline for me. It has been a long process, but it is pretty much finished. We tried a lot of new and different things so now I'm trying to get the setup dialed in. This was not built to be the fastest Stroker out there but to be one of the best tournament rigged boats for day and nighttime fishing. Let me and Chub know what you think. I also wanted to thank Jerry at Boatmate for working with me on the trailer. Danny at Stealth Charging. Brian at Aurora Canvas. Matt at Hytec coatings. Mike at Bluewaterleds. Mike Gardner at Wake to Wake Watersports in Bluff City, TN. Thanks Dustin.
2010 Stroker-modified to fit big man (6'8" 275lbs)
(4" low seats, knee notches in dash, back or rod locker moved forward 5 inches)
Colors: Red/Black no pins with black carpet.
2008 Yamaha 300 hpdi Phase 3 with 1.62 sportmaster with billet shifter and water pump housing seal.
Lowrance HDS8 at console, HDS7 on bow, Structure Scan, engine interface.
Minn Kota 80lb Fortrex
Stainless Marine Hydaulic Jackplate and gauge, pump in boat
Slidemaster 10" plate with Dave D'Alessandro's prototype jackplate trim tab that is activated by the engine trim.
Bluewater Leds in all compartments, under consoles, deck extension, pro kit, and modified factory light, under hds7 ram mount and jackplate.
Stealth Charger with emergency start (absolutely incredible charging system)
Diehard 31 and 2 x 34 Platinum batteries.
Up graded Flowrite livewell, with pumpout, power nozzles, 750gph pump
Concealed mount rod buckles on front and at passenger console.
Eddie Marine vents, handles, gas cap and vent, shifter, cupholders.
Dual rear light mounts (to allow rear light to be used on either side of boat at night)
Moonlight led blacklights with stainless plugs
Uflex steering wheel
Faria Professional Red gauges, Stealth digital gauge
Aurora custom cover.
swivel eze pedestals
Billet boat products rod holder and great lake bounce buster modified to fit Fortrex.
Powdercoated wheels, fenders, trailer steps, jackplate, floor plates, hotfoot, light mounts, cleats, etc.
Lou's Plate but larger to make room for extra large step and hotfoot slide.
Trailer upgraded to F2 jack, swing away tongue, led lights, Stroker logo cutout with custom smoked lens.
Custom prop holder.
Keelshield
Bman foil
I still need to paint the light poles, power pedestals, and I am thinking about painting the jack and powdercoating the fortrex arm, still have to get the rubber mat put down in a few places.
http://i56.tinypic.com/6ycsvm.jpg
http://i53.tinypic.com/2s13mo0.jpg
http://i55.tinypic.com/zl3iab.jpg
http://i55.tinypic.com/xfvp1t.jpg
<br /><br />
Modified by Tacsavage at 12:26 PM 9/2/2010
Modified by Tacsavage at 9:20 AM 9/6/2010
Re: 2010 Stroker- Redline is done! (Tacsavage)
Re: 2010 Stroker- Redline is done! (Tacsavage)
Re: 2010 Stroker- Redline is done! (Tacsavage)
wow i never thought id say that red looked good, but that thing is slick. I love the black rims on the trailer.
Re: 2010 Stroker- Redline is done! (Tacsavage)
Re: 2010 Stroker- Redline is done! (Tacsavage)
That my friend is the Baddest Stroker I have ever seen http://www.bassboatcentral.com/smileys/USA1.gif
Re: 2010 Stroker- Redline is done! (Blue Steel)
Re: 2010 Stroker- Redline is done! (Tacsavage)
Re: 2010 Stroker- Redline is done! (colreb2000)
Re: 2010 Stroker- Redline is done! (Blue Steel)
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Blue Steel »</td></tr><tr><td class="quote">That my friend is the Baddest Stroker I have ever seen http://www.bassboatcentral.com/smileys/USA1.gif </td></tr></table>
+1000000000. That thing is F-ing AWESOME!!!! http://www.bassboatcentral.com/smileys/bows.gif http://www.bassboatcentral.com/smileys/bows.gif http://www.bassboatcentral.com/smileys/bows.gif
I love the molded in seats. Are all Strokers like that? I never payed that much attention.
Re: 2010 Stroker- Redline is done! (RoadrashPaul)
Man that thing is awesome!! Got a couple of questions.. What is the tower type instrument between the tack and mph gages. Also where did you get the yamaha stickers that color matched your boat?? they look great!!! boat is a piece of art man!! http://www.bassboatcentral.com/smileys/thumbsup2.gif http://www.bassboatcentral.com/smileys/thumbsup2.gif
Re: 2010 Stroker- Redline is done! (mcrane)
Thanks. The gauge between the tach and speedo is a mechanical jackplate gauge from Stainless Marine, and my local decal/sign shop had a metallic red material that was an almost exact match for the Vmax on the yamaha so I had them cut me out the yamaha and 300.
Re: 2010 Stroker- Redline is done! (RoadrashPaul)
The seats are actually 4 inches lower than standard. The only other Stroker with them is Nightmare. It helps to get my big melon out of the wind a little.
Re: 2010 Stroker- Redline is done! (Tacsavage)
Re: 2010 Stroker- Redline is done! (Tacsavage)
Re: 2010 Stroker- Redline is done! (SwampNinja)
wow that decal shop did a heck of a job on them decals.. they look great as does the whole boat!!
Re: 2010 Stroker- Redline is done! (mcrane)
Re: 2010 Stroker- Redline is done! (BassCatnVa)
Re: 2010 Stroker- Redline is done! (NitroBoy8)
Re: 2010 Stroker- Redline is done! (Wags186)
