Prop for Lynx with a G2?

Printable View

08-13-2018, 11:48 AM
ZeroSix

Prop for Lynx with a G2?

Anyone running a new Lynx with a G2 that could make a recommendation on the correct prop?

Thank you.
08-13-2018, 12:49 PM
mike464

Here you go! http://www.bbcboards.net/showthread....t=#post9542966
08-13-2018, 02:27 PM
ZeroSix

Thank you. Still looking for a G2 250 v. the 300.
08-13-2018, 02:40 PM
mike464

You might just drop to the 25 pitch and be good.
08-14-2018, 01:00 PM
ZeroSix

I'll give it a shot. Thank you. Do you think there is a need to go to a 4-blade for transom lift?
08-14-2018, 02:00 PM
brinson

My limited experience is with a Verado on the Lynx and am still working on propping it right. I have tried a 24p Fury 3 blade , and a 26p Fury 4 blade. Both props ran fairly well speedwise and after working with the setup, the holeshot was good with both. But neither prop gave the boat enough bow lift in my opinion. The boat runs flat until well over 50 mph and then will pop up on the pad closer to 60 mph.
08-14-2018, 04:21 PM
ZeroSix

Thats good info - thank you. I will let you know what I come up with.
08-14-2018, 07:53 PM
mactlman

Quote:

Originally Posted by brinson

My limited experience is with a Verado on the Lynx and am still working on propping it right. I have tried a 24p Fury 3 blade , and a 26p Fury 4 blade. Both props ran fairly well speedwise and after working with the setup, the holeshot was good with both. But neither prop gave the boat enough bow lift in my opinion. The boat runs flat until well over 50 mph and then will pop up on the pad closer to 60 mph.

try a bravo1 or call mark and get one of his clones