Printable View
So far, the first run with the new 6" jackplate net it me 65.4 @5300 RPM's.
2009 E-tec 150HO, 4" below the pad, 24" Raker II, water temp 70, air temp 69, 1/4 fuel, lots of fishing gear, empty livewells, little chop, tons of water press 25+ lbs.
i'll be bumping up the JP a little at time, the speed was a bit better then i thought, i'm not sure how much more i can squeez out it, it was 62.3 before.
is this a good speed for this boat?
got my old 273 up to 69.8.
That's a nice gain at that prop height. I bet it'll be real good at 3.5 to 3.25 inch prop to pad. Maybe even better than 69mph. http://www.bassboatcentral.com/smileys/thumbsup2.gif
i doubt this boat and motor will see 69...be nice though!
i was hoping to be right about 65-66
Dang good Jeff. I'd bet it has more than you think in it http://www.bassboatcentral.com/smileys/glasses.gif
Thats about right thats what my 2006 285 does with a 150 ho etec. http://www.bassboatcentral.com/smileys/USA1.gif
You're not going to gain more than about another mph or so. 66 is going to about be it, especially with any kind of a load in it. Still running dang good though. Nice pickup. http://www.bassboatcentral.com/smileys/thumbsup2.gif
i'd be more then happy with 66.. http://www.bassboatcentral.com/smileys/glasses.gif
thats good spead with a 150 http://www.bassboatcentral.com/smileys/thumbsup2.gif plenty fast to go fishing.
I got 66.1 out of my old 05' 285 Pro XLDC, so it is possible.
Jeff...what prop were you running on the 273?
i ended with a 25 Renagade, the fastest was a 26 Raker, the 26 had NO holeshot, but ran the best top speed, the Gade was the best all around prop i had.
i ran a 24 Raker, a 25 Gade and the 26 Raker.
Have to agree with you about the Gade...best all around prop!! Had my best speed with a 24 Raker. Running a 24 Fury now. http://www.bassboatcentral.com/smileys/thumbsup2.gif
JeffA,
I have 2000 Stratos w/ a 175 Johnson on it and NO jack plate I run 64.7 MPH at 5600 RPM with 30 PIS of water, with a 23p Laser Prop and that all my fishing gear and me at 340 pounds. can't wait to get my jackplate on mine, I hope to see some fast number then, plus the weight is coming off too, and that will also help a lot....I lower my motor one hole and picked up almost 8 mph now.... I am still works on it to... More Prop work.....
Good luck