Printable View
can anyone help me out an tell me what feeds the ignition switch,trim buttons,and fuel gauge cant find a fuse that feeds these,i was working on my fuel gauge and got the hot between the ground ond the gauge and since then my ignition switch is not working and i cant find a fuse that i could have blown all help would be greatly appreciated tia kc
There might be circuit breaker or fuse back on the positive battery cable near the battery. I would look there or test for 12 volts at the ignition switch.
May have main blown the fuse on the motor...
thanks to replys i can not find main fuse on motor i might be overlooking it,do not have anyvoltage to my switch...i feel like its a fuse somewhere i just cant find it...everything was working good before i started messing with fuel gauge now i have no power to my gauges,my switch,or my trim... thanks for any help
the boat is a 2005 200 pro xl
You have the two seperate fuses on the inside of the transom , other than that if all your breakers / fuses check good on both sides I'd start at the battery and follow the leads . Good luck .