Printable View
Guys,
I've got a customer's boat in the shop and he's got a 98 21extreme, with the graphite dash panels. The switch lettering is gone/faded away. Can anybody help me out with the layout? Left side has 4 switches 1 on top and 3 across the middle of the panel. The right side has 5 switches. Thanks for any help Would sure make it easy to know which switch runs which pump http://www.bassboatcentral.com/smileys/Laugh.gif http://www.bassboatcentral.com/smileys/doh.gif .
Look on the parts site.....there should be new ones on there w the lettering intact.
http://www.candomarineparts.co....html
Also....there was no 98 SS boats......99-01.
Thanks Todd, it was getting dark out and I had a few http://www.bassboatcentral.com/boardstuff2/beers.gif , if is a 99. Thanks for the link.
Hey Todd do you all have a system check light in stock for a 2000 22 SS Extreme? It's the one that is mounted directly above the depth finder in the dash.
I think he is talking about the view system .
this is the third time in six years the lettering on my graphite dash panels have fadded-anysuggestions to re-letter instead of 80.00 to replace panels-i thought of using the tape lettering gun but it looks bad-someone out there has a solution i no thanks guys
Go to Wallyworld or Office Max and get one of the Brother series labelers for around 30.00 or so.. Clear tape with white letters and you can do a decent job. Don't use cleaners to wipe across the letters on the dash. You can use the labeler for your Plano boxes when you get finished with the dash project. http://www.bassboatcentral.com/smileys/smile.gif