tzx200

I see you sold your 25t-1 are you going to get a 25 furry now??


Modified by macinckirk at 11:11 AM 11/5/2008

Yep......I have another 25T1 also....... http://xs-s.com/zf/images/smile/emthup.gif

let me know how it does on your sled when you get it dailed in, compared to the 25t-1 that is B&B

I'm thinking hard about getting 1 but I'm thinking about a 24pitch

Jack the plate as high as it will go. The T1 will carry the load. Dont worry you will not lose water pressure with the plate all the way up. I have run mine with a hydraulic to 1.5" above pad.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tzx200 &raquo;</TD></TR><TR><TD CLASS="quote">Jack the plate as high as it will go. The T1 will carry the load. Dont worry you will not lose water pressure with the plate all the way up. I have run mine with a hydraulic to 1.5" above pad. </TD></TR></TABLE>

The T-1 does a great job with carrying the load but I'm just not getting the r's, 5500 up here on the wood, 5700 on elsinnor last week/fri 71. tenths and this monday could only get 72. tenths less fuel running the speed area, I can only see 5800 for a sec or 2 on a long run like at mead 73. tenths is the best I have seen

I have had the j/p all the way up allready and right now its down about .25 - .50" because I was thinking about moving my motor up a hole but after I started to do it myself I changed my mind (I was going to do it with a floor jack) when I had the motor dyno I should of paid the 100.00 to have it done then http://www.bassboatcentral.com/smileys/doh.gif

I know this boat has more to give and its piss*ng me off http://www.bassboatcentral.com/smileys/popcorn.gif

Using the floor jack works, you only have to loosen the bolts for the slide area so it wont fall and then put the other 2 back in. Cant do that with a Merc. http://www.bassboatcentral.com/smileys/Laugh.gif

Yea that was what I started to do but then I was worried that the top of the motor would move and trying to line up the top holes would be a b*tch I also have the wedge on my j/p for the 20I so its at a diff angle. So I lowered the front of the trailer to the floor and just got cold feet on doing it by myself http://www.bassboatcentral.com/smileys/doh.gif

you know the only time I get worked up about it is when I come to this place http://www.bassboatcentral.com/smileys/roll.gif If I was on big water more I guess I would of allready done something but you know how the lakes are here

But I do know down the road I'm going to buy a 2nd prop for this boat so thats why I'm thinking about it, the other 2 props I have will go with the 202zx when and if it ever sells

Man, it must be noce to have 2 boats. I have the wedges to. Its not that hard, just make sure you loosen the top 2 only and remove the bottom ones and slide her on up!

Damit you made me go out and move that motor up 1 hole at 4:00am this morning http://www.bassboatcentral.com/smileys/stirthepot.gif
I ran the boat today on the wood and talked to Mark a few times, will have to see what it does down the hill now http://www.bassboatcentral.com/smileys/popcorn.gif

I used to be Anal like that, but finally said no more! Trust me you'll sleep better now knowing you did it!