Re: Carpet for 2100 (G-ride)
I just recarpeted the decks on my Gambler a few months ago. I bought the carpet from Bass Cat. Its is a good quality carpet and I did not have any problems with the doors being hard to open or close. It looks like a new boat. I would recommend this carpet to anyone recarpeting their boat.
Re: Carpet for 2100 (G-ride)
Done mine a couple years ago, used 24 oz. Got it from Georgia but dont remember the name. Would not go with anything less than 24 because the backing will show on the 90 degree bends, if lids wont close you can trim the carpet. Lot of the backing pad is being used now also. Basscat has good carpet. Also make sure the grain is cut in the same direction or it will look like a different color for a while. The floor under consoles was a pain in the arse on mine, done it with one piece. 97 209.
Re: Carpet for 2100 (G-ride)
call mike at gambler. i know of a couple of guys that bought their carpet from him http://www.bassboatcentral.com/smileys/thumbsup2.gif
Re: Carpet for 2100 (cripplesnake)
Thanks for all the advice guys...I will probalby be tackling this a little later in October so I am going to go ahead an get all the stuff ready. I have talked to Mike quite a bit and he gave me a bunch of really good pointers on everything too. He also told me that they have the carpet so I may just get everything from him. Thanks again for all the help.
Re: Carpet for 2100 (G-ride)
Nick did Mike say whether or not they would send you the carpet already precut for your specific boat?
Re: Carpet for 2100 (warrenwolk)
He didn't say specifically but I am pretty sure it is not pre cut.