Rtv sealant on my 60 Degree heads

I am putting rtv on my heads on my 150 intruder. Do I make 15 small beads around each water hole or just one big bead outside along the perimeter. Thanks

I make small beads around the openings but not around the thermostat pockets as listed in the service manual.

Do you put any on the heads or just the blocks? Can I by a gasket like I have on my 110 johnson. It is alot easier with one big gasket? Thanks

I just add it to the block, there are no head gaskets for a 60 degree block.....no head gaskets...no head gasket failures. http://www.bassboatcentral.com/smileys/wink.gif