Looking for the best way to fill screw holes and be able to re-drill and secure with screw....what's the best product to use not really possible...
Printable View
Looking for the best way to fill screw holes and be able to re-drill and secure with screw....what's the best product to use not really possible...
Marine-Tex...SB...:salute:
+1
Well now, thanks SB
No problem Carlos...SB...:salute:
You can also get matching Gel Coat from Ranger. Mix hardner with it and fill holes................will match perfectly. Also, a couple of tricks if you are going to use the same holes; One is to use a toothpick in hole and put in new screw..................toothpick will fill up some of wallowed hole when new screw is installed. Also, a small wire tie in old hole will work same as toothpick....................trim off excess when new screw(s) are installed....................RRQuote:
Originally Posted by Firemedicoh