Champ Newbie - Seat Replacements

Hello,
I have an 1984, 17' champion and I am looking for seat replacements. The originals were recessed underneath the base to accomodate the raised area and gasket of the storage area under each seat. In looking at replacements, all I see are seats with a black plastic base on them. These seats would wind up sitting on the gasket and leaving a 3/4" or so gap all around. I could build a frame or something but I was hoping someone here could offer some advice. The originals are beyond salvage. Any advice welcome.
Phil

Welcome to the BBC!

Contact these folks with your HIN#. They can fix you up with everything you need all original. Good to go for another ten plus years.

Deans Top & Canvas
3748 Highway 5 S
Mountain Home, AR 72653

(870) 425-6189

Welcome to the BBC someone that can help you will be along shortly also there is a restoration board on the main page might want to check it out!

Welcome to the BBC and the Champion forum!!!

As the guys have said, Deans can help you!!!

The older champs had a wooden base with a raised lip around them to it wouldn't smash the gasket, may want to try and go by a local upholstery shop and see if they can't fix you up. Next choice would be Deans but it will be pricey no matter which way you go.

Thank you.

Thanks.
You are describing exactly what I have. The old bases are like this and the raised lip is inside the material so it the gasket and raised lip are actually pushing up on loose seat material. This allows the seat to set flush and perhaps seal the storage area.
I will contact Deans. If anyone else has advice, I would appreciate it.
Thanks for the warm welcome . .that may change will all of my questions :-)
Phil

Don't worry about questions! We have the finest folks in the world here...and all enjoy helping.... http://www.bassboatcentral.com/smileys/bows.gif