Printable View
Looking at replacing the front two cleats with a flush type or pull up cleat. I've got a 2000 with the standard cleat that came with the boat but want to replace them but not sure which ones would work / cover the current holes. http://www.bassboatcentral.com/smileys/praying.gif
Thanks for any help. http://www.bassboatcentral.com/smileys/bows.gif
I use the Scotty flush mount rod holder cleats made of black plastic that have the little rubber caps attached to keep water out. They feature optional , removeable rodholders or cleat rings that can be installed in seconds and serve double duty very well. The only drawback to them is a 1 1/4 hole is required to be drilled in order to flushmount them with a holesaw and they require four screwholes . They look very good installed and weigh next to nothing.
Backlash, I'm thinking of doing the same. Most sites dont give measurement of new cleat. Let me know if ya find something.
I'm looking at Attwood. They have the measurements on there website. Looks like the 4 1/2" would work fine...