Which gear should I be in forward,nutral,reverse when installing the lower back on to the engine unit on a 1990 200hp with a 20" shaft? <br /><br />
Modified by digboydig at 5:21 AM 2/9/2012
Modified by digboydig at 5:25 AM 2/9/2012
Printable View
Which gear should I be in forward,nutral,reverse when installing the lower back on to the engine unit on a 1990 200hp with a 20" shaft? <br /><br />
Modified by digboydig at 5:21 AM 2/9/2012
Modified by digboydig at 5:25 AM 2/9/2012
Almost positive it's 1.86.. The 2.0 will fit, but you will need to re prop 1-2 inchs in pitch depending on the rpms it was running.
Sorry I should have been more specific I ment what gear should I be in like forward,nutral or reverse when Im attaching the lower back on to my motor.
I always use "N" as it's the middle of the shift and I can tell when the LU is off where the "middle" is. Some use F or R to turn the prop and prop shaft to line up the driveshaft splines.