300 HPDI water pressure drop

I've got an 04 300 HPDI that I was running 1/4" above pad, at 1/4" above the water pressure was about 16 at WOT. I raised the motor to 1" above pad yesterday and hit the water today and my water pressure at idle is around 2 and at WOT is 5 or 6. I got no alarms and the stream coming out of the motor was strong. Anybody have any idea what is going on? Its on a Bullet 20xrd if it makes any difference.

Maybe your motor is too high?

I wouldnt think it would be to high most of my buddies with Bullets are running an 1 1/4" above and they arent having any issues.

If you have not done so yet, you might wanna post on the Bullet Board.