Printable View
I have a new Series 2, and it is without a doubt a great outboard. I wanted to check and see if any of you have had a problem with the motor moving everywhere when trailering? I have now gone through three transom savers within the past year becasue it bounces so bad while im on the road? Maybe a bad bushing or something? Thanks for your help -Adam
1st off...Welcome to the BBC. http://www.bassboatcentral.com/boardstuff2/beers.gif
Are you breaking the aluminum square tubing on the transom savers from the engine turning side-to-side, or what? If that's the case you can buy a set of <U>stabilizer slips </U>that you install on the steering cylinders while towing.
I use the ones made by pro-rule, and they cost about $10 + shipping. They will eliminate the engine moving side-to-side. If it's moving up & down, I don't really know what you need to look at. I'm sure others will be along with more input soon.
http://www.fishingworld.com/ProRule/
Here is a link to pro-rule. Someone else makes a similar device, except out of a rubber type material. I have not seen them, but hear that they work well also. I think they cost pretty much the same too....Just FYI
lookingfive,thats what I need because it breaks my transom saver from moving side to side. However I would be the one to forget its on there,launch and wonder whats wrong with my trim.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kensafishin »</TD></TR><TR><TD CLASS="quote">lookingfive,thats what I need because it breaks my transom saver from moving side to side. However I would be the one to forget its on there,launch and wonder whats wrong with my trim.</TD></TR></TABLE>
I just did that the other day I took off the clip from my 202zx and put them on the I Class but I'm using the transom saver that came with the I Class instead of the my wedge I have because it seens to make the top house cap on the trim come lose on the ZX well to make a long story short I was in a hurry to get the boat in the water I was 1 hr late allready and pulled the transom saver off and forgot about the clips http://www.bassboatcentral.com/smileys/doh.gif http://www.bassboatcentral.com/smileys/sweating.gif well then the sterring was a bit*h as I was moving to the dock and my trim was reading full http://www.bassboatcentral.com/smileys/doh.gif http://www.bassboatcentral.com/smileys/sweating.gif now I'm thinking WTF and I remenber about the clips
well I had to replace the trim deal and my clips look a little used now also http://www.bassboatcentral.com/smileys/crying.gif
I have 200hp series two on a 2008 188 Champion. I just got it 3-weeks ago and i have traveled every weekend which is about a hour and a half one way, I have not seen any problems when i travel but not to say it want happen.. Let me know if you find the problem
Thanks