I'm going to tinker a bit with my motor height over the winter but I was wondering what is the Max RPM's and water pressure I should look for so as not to mess anything up. It's an '03 250 HPDI on a '03 Skeeter ZX 250. Thanks..
Printable View
I'm going to tinker a bit with my motor height over the winter but I was wondering what is the Max RPM's and water pressure I should look for so as not to mess anything up. It's an '03 250 HPDI on a '03 Skeeter ZX 250. Thanks..
Rev limiter is 6150, But I'd prop it to 5800-6000 light load... water pressure wont be a problem with the HPDI LU.. But no less than 11lbs.. 13+ is better. That boat/motor likes a 26TXP.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 21XDC »</TD></TR><TR><TD CLASS="quote"> That boat/motor likes a 26TXP.</TD></TR></TABLE>
Thanks Mike. What was the stock prop on this motor? I have a feeling what ever stock was, is what's on it now. The guy I bought it from has not touched it from all stock...
Probably a 27T1... Contact plbass for set up help... http://xs-s.com/zf/images/smile/emthup.gif
Thanks again! http://www.bassboatcentral.com/boardstuff2/beers.gif
You should be hitting 20 PSI at wot