Printable View
got a reman power head from merc and putting it on over the next few evenings what is the break in procedure that I need to follow? It is a 200 efi and the oil injection has been removed and is pre mix what do I need to mix at and do I need to run sta bil or any other stuff in the tank
Our break-in is on our website,Too bad we diddnt build the motor for you,Chris
First tank of fuel should be mixed at 40:1 ratio.
After that- 50:1 ratio.
General break-in instructions can be found here:
http://www.bbcboards.net/zerothread?id=494837
Am I reading that wrong or is there less oil during the first tank than normal running conditions?
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by blackram »</td></tr><tr><td class="quote">Am I reading that wrong or is there less oil during the first tank than normal running conditions?</td></tr></table>
You're reading that wrong:
40 parts fuel: to : 1 part oil during first tank
50 parts fuel: to : 1 part oil thereafter
50:1 ratio is less oil per unit of fuel (as compared to a 40:1 ratio). http://www.bassboatcentral.com/smileys/wink.gif
Gotcha...figured it was wrong on my end. Just needed clarification