Printable View
2002 300x , seem to have all kinds of water pressure according to guage but really nothing coming out of the tell tale . Motor running normal temperatures at WOT and idle.
Checked tube for obstructions, put hose on flusher outlet and water pours out of tell tale .
Any ideas.
What are your actual water pressures at:
-IDLE SPEED
-WOT Throttle
Have you tried disconnecting the hose from the telltale fitting- and watching flow FROM THE HOSE (may be a pebble bouncing around just inside the nipple for the fitting)?
Well there must of been something in there because I flushed it last night again with the tell tale nipple off and it sure does spray now.
Water pressure was fine, 2 to 3 psi at idle and 20 plus at WOT