2003 225 Optimax (Don and Wayne)

I've done some sniffing around and it looks like there are some things to be done to my motor. This is a new-to-me Ranger 520 and I am looking to get the most out of the motor. Trying to get any performance out of a boat in New Mexico is a challenge at best. I'm adding a 10" jackplate and will have the prop worked by Croxton.

From what I can tell, I want to do the Flywheel and possibly some ECU mods from Simon and then the tuner from Wayne? I will be calling both of you today to discuss, but I wanted to see if there were other ideas as well.

Thanks in advance,

PS: I need to find out who Stokerdean is...fishes from Wednesday to Sunday night...I need an application! http://www.bassboatcentral.com/smileys/Laugh.gif I'll offer up the same fishing realted adventure...but mine will be limited to the weekend...maybe plus Friday.

Engine serial number?

Eric Simon may have some help for you... I would recommend you talk with him first and discuss options.

Of course... you ALWAYS want to "start" any such project with a HEALTHY, PROPERLY RUNNING ENGINE. Leakdown test, clean injectors, clean direct injectors, proper Air/Fuel pressures, spark on all six cyl's, correct (and clean) spark plugs, etc. http://www.bassboatcentral.com/smileys/wink.gif

Serial Number: OT736365

It is coming from having a considerable amount of work done from the mechanic. The seller is water testing this afternoon and I am hoping to pick it up today. Once I get it...I plan on having my tech here in ABQ check it over...some of the stuff you listed...but I will give him that list.

I will call Eric.

Thanks,