Anyone using that new Fulton f2 jack and if so how do you like it?? Any cons??
Printable View
Anyone using that new Fulton f2 jack and if so how do you like it?? Any cons??
I got one and like it a lot better then the crap that came on my boat.
especially like the adjustability of it
Mark...do you have the double or single wheel?
I have the single wheel!! It is really a nice Jack! Really Stable! You Will probably need to purchase shorter u-bolts for the installation.
My new boat came with the dual wheel model. TRCM is right about them being better than other jacks. They seem to be made more HEAVY DUTY than previous model Fulton Jacks. I also have thew new F2 WINCH on there. It is pure BEEF also.
Was told that it's harder to maneuver with the dual wheels, any truth to that??
I have the double wheel, and it is no harder to manuever than the old single wheel that was on it.
It is easier on soft stuff since you have 2x as much wheel to support it
I have the double wheels and if i want to move it a foot and wheels are pointing in a direction i am not going i have to kick the wheels to get them to move.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by rhsvipre »</td></tr><tr><td class="quote"> You Will probably need to purchase shorter u-bolts for the installation.</td></tr></table>
I Love the jack, but he's right about the U bolts. Neither set it came with worked on my boat's EZ Loader trailer. I had to take the u-bolts out to our machine shop here at work to have them cut, and have the threads run down farther.
I'm leaning more toward the weld on model to give it a factory look and the single wheel because most of my maneuvering is on concrete. Thanks for all the feed back!!
I have the dual wheel model on mine and love it. I have to do a lot of manuvering on concrete to get it in my garage. Dual axle trailer, I raise the jack as high as it will go to get some weight off the front axle tires, and the dual wheeled jack is way easier to move it than my old jack.
I've got a 2003 marine master trailer with the weld on square plate with stud and nut in center.will the single fit and bolt to this..not sure myself.
does your trailer use u-bolts or one single bolt in center.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by foleytriton.2003 »</td></tr><tr><td class="quote">I've got a 2003 marine master trailer with the weld on square plate with stud and nut in center.will the single fit and bolt to this..not sure myself.</td></tr></table>
You need a slight mod to install an adapter plate. The center bolt neets to be cut, and the plate bolts right on. http://www.mastercraft.com/mar...=3967
It look like this when you are finished. http://www.wakeworld.com/forum...e=999
I di the mod and it works like a charm!