Printable View
I have a new EZ Loader trailer withTuff Coat (Made for Skeeter). The trailer did not come wiht ratcher tie downs and was going to add them wiht the adapter sold by boat buckle. The issue I am having is when I crank down the straps it moves the adapter so I took it off and looking for a new idea. Does anyopne else have a similar setup wiht ratchet tie downs or a good idea?
Thanks
http://i52.tinypic.com/1f73sw.jpg
take it to a local welder and have them weld a piece on that will make the boat buckle connect better. Should be inexpensive since it will take about 5 minutes for a good welder.
I have the exact same setup on my BCB trailer and I used the adapter piece that you have to buy separate. I cranked down on the bolts so they don't move at all. Try it again and see if you can tighten the chit out of it so it don't move. When I go to crank on the strap with the Boat buckle it looks like the stap is going to snap. Give it another try. http://www.bassboatcentral.com/smileys/popcorn.gif
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by mcherry »</td></tr><tr><td class="quote">I have the exact same setup on my BCB trailer and I used the adapter piece that you have to buy separate. I cranked down on the bolts so they don't move at all. Try it again and see if you can tighten the chit out of it so it don't move. When I go to crank on the strap with the Boat buckle it looks like the stap is going to snap. Give it another try. http://www.bassboatcentral.com/smileys/popcorn.gif </td></tr></table>
+1. Exactly what I had to do on my '93 BassCat. http://www.bassboatcentral.com/smileys/thumbsup2.gif