Re: Ficht 150 problem (rokkitpete)
is your primer bulb soft......just a thought it could be a bad tstat.....seahorse or danrude would know more about the issue you need to post your serial number to your motor..good luck
Re: Ficht 150 problem (rokkitpete)
Not sure about the primer bulb but the model # is E150FPXSOC.
Re: Ficht 150 problem (rokkitpete)
The Serial # is 05090090. Wouldn't it throw a light on the dash if it were getting hot?
Re: Ficht 150 problem (rokkitpete)
not always u need to run the motor till it gets to about its running temp then put a infrared temp gun and check both of the head temps they should be around 130 degrees
Re: Ficht 150 problem (225RUDE-TRITON)
also have you checked the power pack?? did you index the plugs??? also think about putting it on the computer....IMHO
Re: Ficht 150 problem (rokkitpete)
It sounds like the fuel system needs troubleshooting.
Pressure readings should be taken from the lift pump and the fuel rail at all speeds, plus monitoring a vacuum gauge and clear fuel line at the lift pump intake fitting .
Re: Ficht 150 problem (rokkitpete)
Thanks all for the replies. I did index the plugs. I'll check the bulb for pressure next time I'm out. I have an infared gun and will check the head temp also. Seahorse, what kind of fuel pressure should I be looking for?
Thanks