Re: finally started (kray274)
Get RemoveALLl 620, it will take off the clear coat no sanding, are you going to try to buff out the haze ? or Re Gel coat or paint top cap ?
Re: finally started (kray274)
Re: finally started (northrivergeek)
I have just about got all the clear off now. I am just wet sanding with 2000 grit and then using a 3M glaze to get rid of the scratches then putting a heavy coat of wax down. I am going to get all this done before I lay down the carpet. I also have to replace a piston in the motor. I can't wait to get the carpet down!
Re: finally started (kray274)
I had the same thing with my 363 Ranger. Previous owner rattle canned clear on the top cap http://www.bassboatcentral.com/smileys/doh.gif . Must of been the thing to do back in the day.
Re: finally started (kray274)
well...other than the cosmetics, she looks like she was well cared for.
You say you are gonna strip the clear...are you repainting as well?
deck extension???
I think you will like that motor. I have the same motor on my Hydra Sport. I had a weeee bit of trouble with it at first, but after the little issues were fixed, it seems like a solid running motor. I have only used it 1/2 of a season, but other than a bit hard to start on really cold mornings ( below 40 degrees), it has runs like a champ.
Good luck! have fun!
keep us updated!
Re: finally started (delee36)
Sorry no progress on cosmetics but I found a 1991 Johnson 175 to replace the blown 150. I go to pick it up this Saturday.
Re: finally started (kray274)
nice, man! that thing is begging for a deck extension!
Re: finally started (MassBass320v)
kray, that layout is exactly like my Ranger. Looks like a fun project. A deck extension would be sweet, if your not up for it now, maybe in the future.
good luck
Re: finally started (ranger230v)
I would love to do an extension but I think that may be a little beyond me right now. Like you said maybe in the future. I am just hoping to have it done here in the next few weeks so I can get on the water. The 150 blew last August so I need to get on the water. I can't wait to pick up the 175 and get her bolted up. That should wake up this big old heavy boat.
Re: finally started (kray274)
I guess I need to sell this. I have replaced the carpet, put a 1990 Johnson GT175 on it. The motor needs a fuel pump. I still need to attach the lids and get new locks and latches. I still have a little work to do in the bilge area. Anyone have an opinion on what this might be worth. I would like to know before I put it up for sale about how much I can get out of it.