I'm running 2 large vent plugs and1out on a 25tempest at 3.5 below pad and only turning 5350-5400 rpm and 63 mph with tourney load. I was told to go down on jackplate when Isaac at 2inches below pad to raise bow, can anyone help please.
Printable View
I'm running 2 large vent plugs and1out on a 25tempest at 3.5 below pad and only turning 5350-5400 rpm and 63 mph with tourney load. I was told to go down on jackplate when Isaac at 2inches below pad to raise bow, can anyone help please.
What motor are you running and how is you take off now. PVS plugs only effect take off not top end MPH or RPMS. Start raising your motor 1/4" at a time until you gain rpms but no speed, lose bow lift or WP.