Printable View
I have knocked a good chunk of cork out of my rod handle, was wondering the best way to fix it without replacing the whole handle? Is there something I can fill the hole with that is sandable and will look like cork when I'm done? http://www.bassboatcentral.com/smileys/popcorn.gif
if the missing piece is small enough find some Elmer's wood paste filler in golden oak and fill it in. let it dry and sand smooth with 150 or 200 grit sandpaper, If the hole is large then find a piece of cork from an old fishing rod. Or maybe a wine bottle cork. Cut a chunk to put into the hole that is larger than the hole. Take some super glue and glue the repair piece of cork into the hole. Let it dry good. Now sand down the cork to shape but start easy. When you get the repair sanded down do the Elmer's wood paste thing around the patch. Should be almost good as new.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by EdL »</td></tr><tr><td class="quote">..... Cut a chunk to put into the hole that is larger than the hole. Take some super glue and glue the repair piece of cork into the hole. Let it dry good. Now sand down the cork to shape but start easy. When you get the repair sanded down do the Elmer's wood paste thing around the patch. Should be almost good as new.</td></tr></table>
I'd think mixing Elmer's and small cork chucks, might be easier than using a large piece.
Hadn't thought of the wine cork, thanks. I was going to try some natural wood filler but thought I'd ask first. Believe it or not, first time this has ever happened to me, and I still don't know how....
The glue fix sounds do-able and might stick better, thanks.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by 20_lb_sack »</td></tr><tr><td class="quote">
I'd think mixing Elmer's and small cork chucks, might be easier than using a large piece. </td></tr></table>
Really the large piece is much better as it will match well, can be sanded easier, and won't create a hard spot on the grip. That's the same way you would repair anything else made of wood that had a chunk taken out.
Only difference is I would recommend using Titebond3 (a wood glue that will dry relatively clear) or a 2part epoxy instead of super glue. I think you'll get a better bond. I haven't had good luck with cork and super glue type products.
If you patch it right, you shouldn't need any filler. Don't be afraid to use an exacto knife and clean up the hole in the grip so it's easier to shape a matching plug. I typically will turn the "hole" into a square and then shove a tapered piece of cork into it. Once you sand the top of the plug flush, you won't even be able to see it.